A 2.5-V CMOS Wideband Sigma-Delta Modulator

Por favor, use este identificador para citar o enlazar a este item: http://hdl.handle.net/10261/3770

COMPARTIR / EXPORTAR:

SHARE BASE	Comparte tu historia de Acceso Abierto
Visualizar otros formatos: MARC \| Dublin Core \| RDF \| ORE \| MODS \| METS \| DIDL \| DATACITE
Refman EndNote Bibtex RefWorks Excel CSV PDF DataCite Send via email

Título:	A 2.5-V CMOS Wideband Sigma-Delta Modulator
Autor:	Río, Rocío del CSIC ORCID; Medeiro, Fernando CSIC; Rosa, José M. de la CSIC ORCID; Pérez-Verdú, Belén CSIC; Rodríguez-Vázquez, Ángel CSIC ORCID
Palabras clave:	Wideband Sigma-Delta Modulator
Fecha de publicación:	may-2003
Editor:	Institute of Electrical and Electronics Engineers
Citación:	R. del Río, F. Medeiro, J.M. de la Rosa, B. Pérez-Verdú, and A.Rodríguez-Vázquez, “A 2.5-V CMOS Wideband Sigma-Delta Modulator”, IEEE Instrumentation and Measurement Technology Conference (IMTC/2003), pp 224-228, Vail Colorado (USA), May 2003.
Resumen:	A high-performance Sigma-Delta modulator for wireline communication applications is presenfed It employs a 4th-order cascade multi-bit architecfure that requires only 16 oversampling ratio, and has been implemented using fully-differential SC circuits in a 0.25-μm CMOS technology. Measurements show a dynamic range of 84dB operating at 2.2MS/s output rate, and 79dB at 4.4MS/s. The whole prototype dissipates 65.8mW from a 2.5-V supply.
URI:	http://hdl.handle.net/10261/3770
Aparece en las colecciones:	(IMSE-CNM) Comunicaciones congresos