Por favor, use este identificador para citar o enlazar a este item:
http://hdl.handle.net/10261/153976
COMPARTIR / EXPORTAR:
SHARE CORE BASE | |
Visualizar otros formatos: MARC | Dublin Core | RDF | ORE | MODS | METS | DIDL | DATACITE | |
Título: | Regularized Deconvolution Method for the Resolution Enhancement of a Dual-Frequency Polarized Scatterometer on WCOM |
Autor: | Liu, Liling; Dong, Xiao-long; Lin, Wenming CSIC ORCID | Fecha de publicación: | jun-2017 | Editor: | Institute of Electrical and Electronics Engineers | Citación: | IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing 10(6): 2702-2712 (2017) | Resumen: | A dual-frequency polarized scatterometer (DPSCAT) is proposed for the Chinese Water Cycle Observation Mission (WCOM) to be launched around 2020. DPSCAT is used to measure the snow water equivalent (SWE) and the freeze/thaw state, which requires a measurement precision of 0.5 dB and a relatively higher spatial resolution (2-5 km) than the regular scatterometers (about 25 km). Therefore, the conventional range-gate dechirping along with the Doppler beam sharpening (DBS) technique is used by DPSCAT to achieve high range and azimuth resolution simultaneously. However, DBS cannot improve the azimuth resolution over the nadir swath; thus, a new data processing, namely regularized deconvolution method (RDM), is explored to address this problem. In this paper, a quantitative analysis model is developed for RDM in order to study two crucial issues, i.e., the spatial resolution (mainly for the nadir swath) and the accuracy/precision of the backscatter measurements after resolution enhancement. Normally, the measurement precision and spatial resolution cannot be improved simultaneously using RDM. The accuracy/precision degrades as the spatial resolution improves, and vice versa. Moreover, they both degrade as the measurement noise or uncertainty increases, which latter is usually defined as the normalized standard deviation of the measurements (Kp). In case of SWE retrieval that requires a reconstructed measurement precision of 0.5 dB, the best spatial resolution resolved by RDM is 3 km for Kp = 7%, 4 km for Kp = 10%,and 5km for Kp = 12%. | Descripción: | 11 pages | Versión del editor: | https://doi.org/10.1109/JSTARS.2017.2679127 | URI: | http://hdl.handle.net/10261/153976 | DOI: | 10.1109/JSTARS.2017.2679127 | Identificadores: | issn: 1939-1404 |
Aparece en las colecciones: | (ICM) Artículos |
Mostrar el registro completo
CORE Recommender
SCOPUSTM
Citations
3
checked on 03-may-2024
WEB OF SCIENCETM
Citations
2
checked on 27-feb-2024
Page view(s)
260
checked on 08-may-2024
Google ScholarTM
Check
Altmetric
Altmetric
NOTA: Los ítems de Digital.CSIC están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.