English   español  
Por favor, use este identificador para citar o enlazar a este item: http://hdl.handle.net/10261/96374
logo share SHARE logo core CORE   Add this article to your Mendeley library MendeleyBASE

Visualizar otros formatos: MARC | Dublin Core | RDF | ORE | MODS | METS | DIDL
Exportar a otros formatos:

Effect of naturally formed oxide films and other variables in the early stages of Mg-alloy corrosion in NaCl solution

AutorFeliú Jr., S.; Maffiotte, C.; Samaniego, Alejandro; Galván Sierra, Juan Carlos; Barranco, Violeta
Palabras claveMagnesium alloys
Electrochemical impedance spectroscopy
X-ray photoelectron spectroscopy
Fecha de publicación2011
CitaciónElectrochimica Acta 56(12): 4554-4565 (2011)
ResumenThe influence of initial surface conditions on the subsequent corrosion behaviour of AZ31 and AZ61 magnesium alloys in 0.6 M NaCl solution has been studied using electrochemical impedance spectroscopy. For obtaining the different surface conditions, some of the specimens were immersion tested with the surface in the as-received condition, while others were tested immediately after mechanical polishing, and part of the polished specimens after six months of exposure to the laboratory atmosphere. Considering the evolution of the high-frequency capacitive arc of the Nyquist diagram, whose diameter is related to the corrosion process, a clear effect of the initial surface conditions is observed only in the early stages of testing. This effect is especially significant for the freshly polished specimens
Aparece en las colecciones: (CENIM) Artículos
Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
eanat.pdf1,09 MBAdobe PDFVista previa
Mostrar el registro completo

Artículos relacionados:

NOTA: Los ítems de Digital.CSIC están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.