English   español  
Por favor, use este identificador para citar o enlazar a este item: http://hdl.handle.net/10261/95525
Compartir / Impacto:
Add this article to your Mendeley library MendeleyBASE
Ver citas en Google académico
Visualizar otros formatos: MARC | Dublin Core | RDF | ORE | MODS | METS | DIDL
Exportar otros formatos: Exportar EndNote (RIS)Exportar EndNote (RIS)Exportar EndNote (RIS)

Riprap Protection of Vertical-Wall and Spill-Trough Bridge Abutments

Autor Cardoso, Antonio H.; Fael, Cristina; Simarro, Gonzalo ; Schleiss, Anton
Fecha de publicación 27-jun-2012
Citación 2nd IAHR Europe Congress (2012)
ResumenScour around bridge abutments frequently leads to the collapse of bridge superstructures. Consequently, scour countermeasures are usually designed and installed by river engineers, riprap matting being the most widespread solution. The associated design criteria must attend to two groups of failure mechanisms: i) those associated the abutment body stability, which include particle erosion, translational slide failure, modified slump and slump failure; ii) those associated with the riprap apron stability, including shear, winnowing, edge failure, bed-form undermining and river bed degradation. The work presented in this communication consists on the review of design criteria recently published by the authors to face particle erosion, shear, winnowing and edge failure mechanisms at vertical-wall and spill-trough bridge abutments, under clear water flow conditions. These are the key aspects to be faced as soon as abutments are located in flood plains, their side slopes are not too steep and pore pressure is negligible. The work is based on a large experimental campaign carried out at several facilities and allows the specification of blocs¿diameter, plan layout and thickness of riprap mattresses
Descripción 2nd International Association for Hydro-Environment Engineering and Research (IAHR) Europe Congress: Water - infinitely deformable but still limited, 27-29. June 2012, Munich, Bavaria, Germany
Versión del editorhttp://www.iahr2012.tum.de/
URI http://hdl.handle.net/10261/95525
Aparece en las colecciones: (ICM) Comunicaciones congresos
Ficheros en este ítem:
No hay ficheros asociados a este ítem.
Mostrar el registro completo

NOTA: Los ítems de Digital.CSIC están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.