English   español  
Por favor, use este identificador para citar o enlazar a este item: http://hdl.handle.net/10261/92998
COMPARTIR / IMPACTO:
Estadísticas
logo share SHARE logo core CORE   Add this article to your Mendeley library MendeleyBASE

Visualizar otros formatos: MARC | Dublin Core | RDF | ORE | MODS | METS | DIDL
Exportar a otros formatos:
Título

Use of hydraulic tests to identify the residual CO2 saturation at a geological storage site

AutorMartínez Landa, Lurdes; Rötting, Tobias; Carrera Ramírez, Jesús; Russian, Anna; Dentz, Marco ; Cubillo, Bruno
Palabras claveHydraulic testing
Analytical solution
Type curves
Carbon capture and storage
Fecha de publicaciónnov-2013
EditorElsevier
CitaciónInternational Journal of Greenhouse Gas Control 19: 652-664 (2013)
ResumenEstimating long term capillary trapping of CO2 in aquifers remains a key challenge for CO2 storage. Zhang et al. (2011) proposed a combination of thermal, tracer, and hydraulic experiments to estimate the amount of CO2 trapped in the formation after a CO2 push and pull test. Of these three types of experiments, hydraulic tests are the simplest to perform and possibly the most informative. However, their potential has not yet been fully exploited. Here, we present a methodology to interpret these tests and analyze which parameters can be estimated. We use numerical and analytical solutions to a continuous injection in a medium where residual CO2 has caused a reduction in hydraulic conductivity and an increase in storage coefficient over a finite thickness (a few meters) skin around the injection well. We interpret the model results using conventional pressure buildup and diagnostic plots as well as the Agarwal (1980) recovery plots. We find that both skin hydraulic conductivity and storage coefficient (and thus residual CO2 saturation) can be obtained from the water injection test provided that water flow rate is carefully controlled and head buildup is measured with high frequency at the beginning of the test. © 2013 Elsevier Ltd.
URIhttp://hdl.handle.net/10261/92998
DOI10.1016/j.ijggc.2013.01.043
Identificadoresdoi: 10.1016/j.ijggc.2013.01.043
issn: 1750-5836
Aparece en las colecciones: (IDAEA) Artículos
Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
accesoRestringido.pdf15,38 kBAdobe PDFVista previa
Visualizar/Abrir
Mostrar el registro completo
 

Artículos relacionados:


NOTA: Los ítems de Digital.CSIC están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.