English   español  
Por favor, use este identificador para citar o enlazar a este item: http://hdl.handle.net/10261/88321
Compartir / Impacto:
Estadísticas
Add this article to your Mendeley library MendeleyBASE
Visualizar otros formatos: MARC | Dublin Core | RDF | ORE | MODS | METS | DIDL
Título

Laser cladding of Ni- and Co-based coatings for turbine industry applications

AutorJendrzejewski, R; Sliwinski, G.; Conde, A. ; Damborenea, Juan de
Palabras claveLaser
Optical coatings
Chromium
Cladding
Fecha de publicación2003
EditorSociety of Photo-Optical Instrumentation Engineers
CitaciónProceedings of SPIE - The International Society for Optical Engineering 5229: 233-238 (2003)
ResumenLaser cladding by means of direct remelting of allow powders Stellite SF6 and Metco 16C was applied for production of protective coatings on chromium steel substrates of composition close to that of the gas turbine blades which operate in extremely aggressive environment. For sample preparation a 1.2 kW cw CO2 laser with powder jet coaxial to the laser beam was used. Compared to previous experiments the controlled preheating of substrate at temperatures around 500-720°C was applied and resulted in crack-free coatings.
URIhttp://hdl.handle.net/10261/88321
DOI10.1117/12.520723
Identificadoresdoi: 10.1117/12.520723
issn: 0277-786X
Aparece en las colecciones: (CENIM) Artículos
Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
accesoRestringido.pdf15,38 kBAdobe PDFVista previa
Visualizar/Abrir
Mostrar el registro completo
 

Artículos relacionados:


NOTA: Los ítems de Digital.CSIC están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.