English   español  
Por favor, use este identificador para citar o enlazar a este item: http://hdl.handle.net/10261/87621
COMPARTIR / IMPACTO:
Estadísticas
logo share SHARE logo core CORE   Add this article to your Mendeley library MendeleyBASE

Visualizar otros formatos: MARC | Dublin Core | RDF | ORE | MODS | METS | DIDL
Exportar a otros formatos:
Título

Corrosion of stainless steels covered by exopolymers

AutorCristóbal, A. B.; Arenas, M. A.; Conde, A. ; Damborenea, Juan de
Fecha de publicación2006
EditorElsevier
CitaciónElectrochimica Acta 52: 546-551 (2006)
ResumenAfter a biologically induced corrosion in a 304 stainless steel tube electrochemical tests were carried out on the affected areas to characterise the nature of attack of the steel covered by the excreted exopolymers. Once the corrosive attack has been developed, the samples were removed from the solution, dried out for 1 month and re-immersed in the same well water which caused the attack. Polarization curves and impedance measurements made on non attacked welds, reference stainless steel and the metal covered by the exopolymer confirm that a reactivation of the corrosion process in previously damaged welded areas is produced. However, the corrosive attack has not been so severe than the initially produced by bacteria and after 28 days of immersion the progress of the attack is probably due to the previous activation of the steel surface rather than the microbiological activity. © 2006 Elsevier Ltd. All rights reserved.
URIhttp://hdl.handle.net/10261/87621
DOI10.1016/j.electacta.2006.05.045
Identificadoresdoi: 10.1016/j.electacta.2006.05.045
issn: 0013-4686
Aparece en las colecciones: (CENIM) Artículos
Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
accesoRestringido.pdf15,38 kBAdobe PDFVista previa
Visualizar/Abrir
Mostrar el registro completo
 

Artículos relacionados:


NOTA: Los ítems de Digital.CSIC están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.