English   español  
Por favor, use este identificador para citar o enlazar a este item: http://hdl.handle.net/10261/87615
Compartir / Impacto:
Estadísticas
Add this article to your Mendeley library MendeleyBASE
Citado 62 veces en Web of Knowledge®  |  Ver citas en Google académico
Visualizar otros formatos: MARC | Dublin Core | RDF | ORE | MODS | METS | DIDL
Exportar otros formatos: Exportar EndNote (RIS)Exportar EndNote (RIS)Exportar EndNote (RIS)
Título

Corrosion behaviour of steels after laser surface melting

Autor Conde, A. ; Damborenea, Juan de
Fecha de publicación 2000
EditorElsevier
Citación Materials and Design 21: 441-445 (2000)
ResumenLaser surface melting (LSM) were carried out in three types of stainless steels — austenitic, martensitic and ferritic — in order to improve pitting corrosion resistance. After the LSM, most of the steels present a shift in the pitting potential to more noble values, a longer passivity stage and lower passive current density than the substrate. These improvements are achieved by means of a modified surface layer, more homogeneous with a fine cellular dendritic structure free of large precipitates. Nevertheless, the corrosion resistance depends critically on the laser processing parameters, particularly for the cases of ferritic and martensitic stainless steels. Therefore, care must be taken in the choice of the laser-processing parameters that leads to optimal properties in each material.
URI http://hdl.handle.net/10261/87615
DOI10.1016/S0261-3069(00)00037-6
Identificadoresdoi: 10.1016/S0261-3069(00)00037-6
issn: 0264-1275
Aparece en las colecciones: (CENIM) Artículos
Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
accesoRestringido.pdf15,38 kBAdobe PDFVista previa
Visualizar/Abrir
Mostrar el registro completo
 



NOTA: Los ítems de Digital.CSIC están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.