English   español  
Please use this identifier to cite or link to this item: http://hdl.handle.net/10261/76611
Share/Impact:
Statistics
logo share SHARE logo core CORE   Add this article to your Mendeley library MendeleyBASE

Visualizar otros formatos: MARC | Dublin Core | RDF | ORE | MODS | METS | DIDL
Exportar a otros formatos:
Title

Development of IR frequency standards based on laser diodes | Desarrollo de patrones de frecuencia en el IR basados en láseres de diodo

AuthorsGalindo Santos, Juan ; Alcon-Camas, Mercedes ; Carrasco-Sanz, Ana; Martín-López, Sonia; Corredera, Pedro
Issue Date2012
PublisherSociedad Española de Óptica
CitationOptica Pura y Aplicada 45: 221-231 (2012)
AbstractOptical frequency combs have extremely high measurement accuracy for laser frequencies in the optics range, up to an order of approximately ~10-11. However, this technique requires narrow linewidth and frequency stable laser sources. The first set of measurement results we carried out were with an optical frequency comb in the 1550 nm range. These measurements are focused on the frequency stability, linewidth of the laser source and the absolute value of the optical frequency. Two wavemeters for optical communications were calibrated using the previous results. Furthermore, the stabilization of a laser diode in the Rb atomic absorption at 780 nm is presented. This source is expected to be used as calibration standard for wavemeters and as reference laser for optical clocks and frequency combs comparison. © 2012 Sociedad Española de Óptica.
URIhttp://hdl.handle.net/10261/76611
DOI10.7149/OPA.45.2.221
Identifiersdoi: 10.7149/OPA.45.2.221
issn: 0030-3917
Appears in Collections:(CFMAC-IO) Artículos
Files in This Item:
File Description SizeFormat 
Galindo.pdf452,6 kBAdobe PDFThumbnail
View/Open
Show full item record
Review this work
 


WARNING: Items in Digital.CSIC are protected by copyright, with all rights reserved, unless otherwise indicated.