English   español  
Please use this identifier to cite or link to this item: http://hdl.handle.net/10261/75044
Share/Impact:
Statistics
logo share SHARE   Add this article to your Mendeley library MendeleyBASE

Visualizar otros formatos: MARC | Dublin Core | RDF | ORE | MODS | METS | DIDL
Exportar a otros formatos:
Title

Photochemical solution deposition of lead-based ferroelectric films: Avoiding the PbO-excess addition at last

AuthorsBretos, Íñigo ; Jiménez, Ricardo ; García López, J. ; Pardo, Lorena ; Calzada, M. L.
Issue Date2008
PublisherAmerican Chemical Society
CitationChemistry of Materials 20(18): 5731-5733 (2008)
AbstractA method was demonstrated for photochemical solution deposition of lead-based ferroelectric films without PbO addition. The films developed from a stoichimetric (Pb0.76Ca0.24)TiO3 solution by UB sol-gel photoannealing at 450 °C. The study found that nanometric grains of size below 50 nm form the microstructure of these films. The study observed that processing of gel film under UV irradiation is responsible for formation of the crystalline oxide phase at 450 °C without any PbO excess. The study also found that the short range diffusion of elements leads to the stabilization of metastable phases in the films. The low temperature for crystallization of the films can prevent the reoxidation and a ferro-paraelectric transition is observed for films showing different amount of PbO.
URIhttp://hdl.handle.net/10261/75044
DOI10.1021/cm801269g
Identifiersdoi: 10.1021/cm801269g
issn: 0897-4756
e-issn: 1520-5002
Appears in Collections:(CNA) Artículos
(ICMM) Artículos
Files in This Item:
File Description SizeFormat 
accesoRestringido.pdf15,38 kBAdobe PDFThumbnail
View/Open
Show full item record
Review this work
 


WARNING: Items in Digital.CSIC are protected by copyright, with all rights reserved, unless otherwise indicated.