English   español  
Por favor, use este identificador para citar o enlazar a este item: http://hdl.handle.net/10261/7151
Compartir / Impacto:
Add this article to your Mendeley library MendeleyBASE
Visualizar otros formatos: MARC | Dublin Core | RDF | ORE | MODS | METS | DIDL

A multichannel active system for control of the booming inside a van

AutorBravo, M. Teresa; Cobo, Pedro; Martín, Juan Manuel
Fecha de publicaciónmar-1999
EditorDeutsche Gesellschaft für Akustik
Citación137th Meeting of the Acoustical Society of America. Structural Acoustics and Vibration ; 11
ResumenAn active sound control (ANC) system has been developed to reduce the booming of a van arisen when the engine noise excites some modes of the passenger compartment. Specially the SO-250 HZ frequency range is of primary interest. The intention is to implement a feedforward system, using microphones as error sensors and loudspeakers as secondary sources. First, a reference signal, coherent with the unwanted noise, has to be searched. The acoustic field inside the van is expressed as the sum of a series of acoustics modes. The optimal locations of loudspeakers are found by simulated annealing. Finally, the multichannel active noise control system is implemented using a commercial system. Measurements of noise reduction has been carried out in the semianechoic room at NECT-E under usual driving conditions (3rd gear, fast acceleration).
Descripción4 pp.-- Comunicación presentada en: Joint Meeting "Berlin 99": 137th regular meeting of the Acoustical Society of America ; 2nd convention of the EAA: Forum Acusticum - integrating the 25th German Acoustics DAGA Conference. Berlin, March 14-19, 1999.
Aparece en las colecciones: (IA) Comunicaciones congresos
Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
4ASAB_11.pdf862,36 kBAdobe PDFVista previa
Mostrar el registro completo

NOTA: Los ítems de Digital.CSIC están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.