English   español  
Por favor, use este identificador para citar o enlazar a este item: http://hdl.handle.net/10261/5994
COMPARTIR / IMPACTO:
Estadísticas
logo share SHARE   Add this article to your Mendeley library MendeleyBASE
Visualizar otros formatos: MARC | Dublin Core | RDF | ORE | MODS | METS | DIDL
Exportar a otros formatos:
Título

Hybrid passive-active sound absorption in a standing wave tube using a thin plate actuator as secondary source

AutorCuesta, María; Cobo, Pedro; Pfretzschner, Jaime; Fernández, Alejandro
Palabras claveSound absorption
Noise control
Active/Passive Techniques
Standing wave tube
Hybrid absorber
Frequency range
Fecha de publicaciónabr-2004
EditorInternational Congress on Acoustics
Citación18th International Congress on Acoustics, Engineering acoustics and electro-acoustics. 6. Active noise control, Tu4.E.2
ResumenThis paper deals with the design and optimization of a hybrid passive/active liner for broadband noise reduction in a standing wave tube. The thickness of the multilayer absorbent is reduced in two steps: firstly a porous layer backed by an air gap is substituted by a microperforated panel followed by a reduced air gap; and secondly, the secondary loudspeaker is replaced by a thin plate driven by a piezoceramic patch. Experimental results show that high absorption may be achieved in a wide frequency range (100-900 Hz) with a thin hybrid passive/active absorber.
DescripciónCommunication presented at the 18th International Congress on Acoustics (ICA 2004): "Acoustical Science and Technology for Quality of Life", Kyoto, 4-9 April 2004.
URIhttp://hdl.handle.net/10261/5994
Aparece en las colecciones: (IA) Comunicaciones congresos
Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
Tu4.E.2.pdf224,46 kBAdobe PDFVista previa
Visualizar/Abrir
Mostrar el registro completo
 


NOTA: Los ítems de Digital.CSIC están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.