English   español  
Please use this identifier to cite or link to this item: http://hdl.handle.net/10261/58901
Share/Impact:
Statistics
logo share SHARE logo core CORE   Add this article to your Mendeley library MendeleyBASE

Visualizar otros formatos: MARC | Dublin Core | RDF | ORE | MODS | METS | DIDL
Exportar a otros formatos:

Title

Influence of the processing temperature on the microstructure, texture and hardness of the 7075 aluminium alloy fabricated by accumulative roll bonding

AuthorsHidalgo, P.; Cepeda-Jiménez, C.M.; Ruano, Oscar Antonio; Carreño, Fernando
KeywordsAluminum alloy
Microstructure
Texture
Dislocation density
Issue Date2010
PublisherSpringer
CitationMetallurgical and Materials Transactions - Series A 41 (3) : 758-767 (2010)
AbstractThe 7075 alloy is an Al-Zn-Mg-Cu wrought age-hardenable aluminum alloy widely used in the aeronautical industry. The alloy was accumulative roll bonded at 300 °C (573 K), 350 °C (623 K), and 400 °C (673 K), and the microstructure, texture, and hardness were investigated. Cell/(sub)grain size in the nanostructured range, typical β-fiber rolling texture, and homogeneous hardness through thickness were determined in all cases. Misorientation was different at each processing temperature. At 400 °C, the presence of elements in solid solution and the partial dissolution of the hardening precipitates lead to a poorly misoriented microstructure with a high dislocation density and a homogeneous β-fiber texture of low intensity, typical of intermediate degrees of rolling. At 350 °C and 300 °C, highly misoriented microstructures with smaller dislocation density and intense heterogeneous β-fiber rolling texture are observed, especially at 350 °C, wherein the degree of dynamic recovery (DRV) is higher. Hardness of the accumulative roll bonded samples is smaller than that of the starting material due to particle coarsening, and it is affected by solid solution and/or by fine precipitates produced by reprecipitation of the elements in solid solution.
Publisher version (URL)http://dx.doi.org/10.1007/s11661-009-0138-1
URIhttp://hdl.handle.net/10261/58901
DOI10.1007/s11661-009-0138-1
ISSN0255-5476
Appears in Collections:(CENIM) Artículos
Files in This Item:
File Description SizeFormat 
Influence of the processing.pdf1,4 MBAdobe PDFThumbnail
View/Open
Show full item record
Review this work
 

Related articles:


WARNING: Items in Digital.CSIC are protected by copyright, with all rights reserved, unless otherwise indicated.