English   español  
Please use this identifier to cite or link to this item: http://hdl.handle.net/10261/58341
logo share SHARE logo core CORE   Add this article to your Mendeley library MendeleyBASE

Visualizar otros formatos: MARC | Dublin Core | RDF | ORE | MODS | METS | DIDL
Exportar a otros formatos:


Study of the Deformation Mechanisms of the Superplastic Alloy Ai–Li 2090 by Texture Analysis

AuthorsPérez Prado, María Teresa; Cristina, M. C.; Ruano, Oscar Antonio; González-Doncel, Gaspar
KeywordsDeformation mechanisms
Texture analysis
Crystallographic slip
Issue Date2000
PublisherTaylor & Francis
CitationTextures and Microstructures 34(4) : 205-216 (2000)
AbstractThe deformation mechanisms of a superplastic Al–Li 2090 alloy have been investigated by means of texture analysis. It has been found that both crystallographic slip (CS) and grain boundary sliding (GBS) operate in response to the applied stress over a wide range of deformation, conditions. This is in contrast to well-accepted creep models, which predict that only one mechanism should operate and that the transition from one mechanism to another is abrupt and takes place over a narrow range of deformation conditions. Additionally, according to geometric (Taylor-type) models of uniaxial deformation for CS, the 〈110〉, 〈111〉, or 〈001〉 fibers should appear when 4, 6, or 8 slip systems operate. Here, however, CS contributes to stabilize orientations belonging to the α and β fibers.
Publisher version (URL)http://dx.doi.org/10.1155/TSM.34.205
Appears in Collections:(CENIM) Artículos
Files in This Item:
There are no files associated with this item.
Show full item record
Review this work

WARNING: Items in Digital.CSIC are protected by copyright, with all rights reserved, unless otherwise indicated.