English   español  
Please use this identifier to cite or link to this item: http://hdl.handle.net/10261/56678
Share/Impact:
Statistics
logo share SHARE logo core CORE   Add this article to your Mendeley library MendeleyBASE

Visualizar otros formatos: MARC | Dublin Core | RDF | ORE | MODS | METS | DIDL
Exportar a otros formatos:

Title

Superplastic behavior of thermomechanically processed Fe-0.8 B-1.3 C-1.6 Cr (wt%) alloy

AuthorsAcosta, P.; Jiménez, José Antonio; Frommeyer, G.; Ruano, Oscar Antonio
KeywordsMicrostructure
Thermomechanical processing
Borocarbide particles
Issue Date1996
PublisherElsevier
CitationMaterials Letters 26(1-2) : 97-101 (1996)
AbstractThe coarse microstructure of the as-cast Fe-0.8 B-1.3 C-1.6 Cr (wt%) alloy was refined by a thermomechanical processing consisting of rolling at 1050 °C (ε = −2.8) and then rolling from 950 to 670 °C (ε = −1). The final microstructure consists of very fine cementite particles and small, and some large, borocarbide particles in a fine-grained ferritic matrix. A stress exponent of about 2.5 at low strain rates and a maximum elongation to failure of 98% was observed at temperatures ranging from 660 to 720 °C.
Publisher version (URL)http://dx.doi.org/10.1016/0167-577X(95)00193-X
URIhttp://hdl.handle.net/10261/56678
DOI10.1016/0167-577X(95)00193-X
ISSN0167-577X
Appears in Collections:(CENIM) Artículos
Files in This Item:
There are no files associated with this item.
Show full item record
Review this work
 

Related articles:


WARNING: Items in Digital.CSIC are protected by copyright, with all rights reserved, unless otherwise indicated.