English   español  
Please use this identifier to cite or link to this item: http://hdl.handle.net/10261/53921
logo share SHARE   Add this article to your Mendeley library MendeleyBASE
Visualizar otros formatos: MARC | Dublin Core | RDF | ORE | MODS | METS | DIDL
Exportar a otros formatos:


Corrosion behaviour of a new low-nickel stainless steel embedded in activated fly ash mortars

AuthorsCriado, María ; Bastidas, D. M.; Fajardo, S.; Fernández-Jiménez, Ana; Bastidas, J. M.
KeywordsLow-nickel stainless steel
Reinforced concrete
Alkali-activated fly ash mortar
Chloride addition
Issue Date2011
CitationCement and Concrete Composites; 33 (6) : 644-652 (2011)
AbstractThe present paper studies the corrosion behaviour of alkali-activated fly ash (AAFA) mortars manufactured using two alkaline solutions, with and without chloride additions (0.4% and 2%) in an environment of constant 95% relative humidity. Measurements were performed at early age curing up to 180 days of experimentation. A new, lower-cost type of austenitic stainless steel (SS) with a low nickel content was studied. Conventional austenitic AISI 304 SS and carbon steel rebar were also tested for comparative purposes. The evolution with time of corrosion potential, polarization resistance and electrochemical impedance spectroscopy were studied.
Publisher version (URL)http://www.sciencedirect.com/science/article/pii/S0958946511000631
Appears in Collections:(IETCC) Comunicaciones congresos
Files in This Item:
There are no files associated with this item.
Show full item record
Review this work

WARNING: Items in Digital.CSIC are protected by copyright, with all rights reserved, unless otherwise indicated.