English   español  
Por favor, use este identificador para citar o enlazar a este item: http://hdl.handle.net/10261/5314
Compartir / Impacto:
Estadísticas
Add this article to your Mendeley library MendeleyBASE
Ver citas en Google académico
Visualizar otros formatos: MARC | Dublin Core | RDF | ORE | MODS | METS | DIDL
Exportar otros formatos: Exportar EndNote (RIS)Exportar EndNote (RIS)Exportar EndNote (RIS)
Título : Air-coupled CMUT arrays based on MUMPS
Autor : Octavio Manzanares, Alberto ; Martínez-graullera, Oscar ; Martín Arguedas, Carlos J. ; Gómez-Ullate Alvear, Luis; Montero de Espinosa Freijo, Francisco
Palabras clave : Capacitive Micromachined Ultrasonic Transducers (cMUTs)
Multi-User MEMS process (MUMPS)
Air-coupled 2-D CMUT arrays
Transducer performance
Array efficiency
Fecha de publicación : dic-2007
Editor: Sociedad Española de Acústica
Citación : XIX Congreso Internacional de Acústica (ICA2007)
Serie : ICA2007
ULT-04-005
Resumen: Manufacturing capacitive micromachined ultrasonic transducers (cMUTs) is possible using several low cost standard processes. The multi-user MEMS process (MUMPS) offers this possibility. However, it has some limitations: diaphragms and air gaps of approximately 2 μm thick limit the performance of the resulting device.
With the aim of developing an air-coupled 2-D array, several typologies were designed, made and characterized. It was shown that all of them work as was expected with a good bandwidth in air but there were some negative effects on their behaviour. The polysilicon layers are heavily doped and in principle they do not need a metallization layer. Nevertheless studying the obtained results it was shown that when a metal electrode is deposited over the polysilicon membrane, the performance of the transducer is improved. Moreover, the acoustic pressure leaving from the etch holes and other acoustical ports added in several designs have a negative effect in the emitted pressure. In this work, square shaped polysilicon membranes with a gold electrode have been simulated and made to reduce these detected negative effects. Two different array apertures, a 1-D array and a sparse 2-D array, have been designed to study their efficiency.
Descripción : Ponencia presentada en el XIX Congreso Internacional de Acústica (ICA2007), Madrid, 2-7 Sep 2007.-- PACS: 43.38.Hz.
URI : http://hdl.handle.net/10261/5314
Aparece en las colecciones: (IAI) Comunicaciones congresos
(IA) Comunicaciones congresos
Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
ult-04-005.pdf685,17 kBAdobe PDFVista previa
Visualizar/Abrir
Mostrar el registro completo
 


NOTA: Los ítems de Digital.CSIC están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.