English   español  
Please use this identifier to cite or link to this item: http://hdl.handle.net/10261/52595
logo share SHARE logo core CORE   Add this article to your Mendeley library MendeleyBASE

Visualizar otros formatos: MARC | Dublin Core | RDF | ORE | MODS | METS | DIDL
Exportar a otros formatos:


Directionally solidified CeO2 (or GDC)/CoO eutectic ceramics as cermet precursors for SOFCs anodes: Microstructure cross-over

AuthorsOrtega, Luis; Peña, J. I.; Orera, V. M.
Issue Date2011
CitationJournal of the European Ceramic Society 31(7): 1269-1276 (2011)
AbstractRods of CeO2 and gadolinium-doped CeO2 (GDC)–CoO eutectics were prepared by directional solidification using a laser heated floating zone (LFZ) technique. The microstructure has been studied as a function of the growth rate from V = 10 to 750 mm/h. Regular eutectic microstructures are obtained except for the highest growth rate. The interspacing follows the λ2V =ClawwithC= 4.1(3)×10−17 and 2.6(3)×10−17 m3/s for CeO2–CoO and GDC–CoO eutectics, respectively. A cross-over between fibrous and lamellar eutectic microstructures was observed depending on the growth rate. The crystallography of the eutectics was studied by Electron Backscatter Diffraction (EBSD). The growth directions [1 1 0] GDC -- //[110] Co02, and the interfacial planes (200)GDC//(111)CoO, were identified. Solubility of Co in the ceria matrix was determined by Energy Dispersive X-ray (EDX) Spectroscopy after Co was leached out from the matrix. Co solubility in ceria at 1650 ◦C was found to be less than 1 mol%.
Identifiersdoi: 10.1016/j.jeurceramsoc.2010.06.012
issn: 0955-2219
Appears in Collections:(ICMA) Artículos
Files in This Item:
File Description SizeFormat 
accesoRestringido.pdf15,38 kBAdobe PDFThumbnail
Show full item record
Review this work

Related articles:

WARNING: Items in Digital.CSIC are protected by copyright, with all rights reserved, unless otherwise indicated.