English   español  
Please use this identifier to cite or link to this item: http://hdl.handle.net/10261/50432
logo share SHARE logo core CORE   Add this article to your Mendeley library MendeleyBASE

Visualizar otros formatos: MARC | Dublin Core | RDF | ORE | MODS | METS | DIDL
Exportar a otros formatos:

Sliding wear behaviour of alumina/nickel nanocomposites processed by a conventional sintering route

AuthorsRodríguez Suárez, Teresa ; Bartolomé Gómez, José Florindo ; Smirnov, Anton ; López-Esteban, Sonia; Torrecillas, Ramón ; Moya, J. S.
Issue Date2011
CitationJournal of the European Ceramic Society 31(8): 1389-1395 (2011)
AbstractThe wear resistance of Al2O3/2.5vol.% Ni nanocomposites sintered by a conventional route was studied under ball-on-disk dry sliding conditions and compared with the same nanocomposites but consolidated by spark plasma sintering, together with alumina obtained by the same technique and by hot pressing. The results showed an improvement of about 0.5, 1 and 2 orders of magnitude, respectively. Thus, alumina/Ni nanocomposites processed by conventional route can compete, in cost and wear performance, with nanomaterials obtained by more sophisticated techniques. © 2011 Elsevier Ltd.
DescriptionEl pdf del artículo es la versión pre-print.
Identifiersdoi: 10.1016/j.jeurceramsoc.2011.02.011
issn: 0955-2219
Appears in Collections:(ICMM) Artículos
(CINN) Artículos
Files in This Item:
File Description SizeFormat 
Sliding wear.pdf6,59 MBAdobe PDFThumbnail
Show full item record
Review this work

Related articles:

WARNING: Items in Digital.CSIC are protected by copyright, with all rights reserved, unless otherwise indicated.