English   español  
Por favor, use este identificador para citar o enlazar a este item: http://hdl.handle.net/10261/49812
Compartir / Impacto:
Estadísticas
Add this article to your Mendeley library MendeleyBASE
Visualizar otros formatos: MARC | Dublin Core | RDF | ORE | MODS | METS | DIDL
Título

Microstructure development in mixes of calcium aluminate cement with silica fume or fly ash

AutorHidalgo, A.; García, J. L.; Alonso, C.; Fernández, Lorenzo; Andrade, C.
Palabras claveCalcium
Aluminate cement
Fly ash
Microstructure
Silica fume
TG-DTA
WAXS
Fecha de publicación2009
EditorSpringer
CitaciónJournal of Thermal Analysis and Calorimetry; 96 (2) : 335-345 (2009)
ResumenThe most widely identified degradation process suffered by calcium aluminate cement (CAC) is the so-called conversion of hexagonal calcium aluminate hydrate to cubic form. This conversion is usually followed by an increase in porosity determined by the different densities of these hydrates and the subsequent loss of strength. Mixes of calcium aluminate cement (CAC) and silica fume (SF) or fly ash (FA) represent an interesting alternative for the stabilization of CAC hydrates, which might be attributed to a microstructure based mainly on aluminosilicates. This paper deals with the microstructure of cement pastes fabricated with mixtures CAC-SF and CAC-FA and its evolution over time. Thermal analysis (DTA/TG), X-ray diffraction (XRD) and mid-infrared spectroscopy (FTIR) have been used to assess the microstructure of these formulations.
Versión del editorhttp://www.springerlink.com/content/b67r5448615n7x5r/
URIhttp://hdl.handle.net/10261/49812
ISSN1418-2874
Aparece en las colecciones: (CISDEM) Artículos
Ficheros en este ítem:
No hay ficheros asociados a este ítem.
Mostrar el registro completo
 


NOTA: Los ítems de Digital.CSIC están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.