English   español  
Por favor, use este identificador para citar o enlazar a este item: http://hdl.handle.net/10261/4945
logo share SHARE   Add this article to your Mendeley library MendeleyBASE
Visualizar otros formatos: MARC | Dublin Core | RDF | ORE | MODS | METS | DIDL
Exportar a otros formatos:

Belite Cement Clinker from Coal Fly Ash of High Ca Content. Optimization of Synthesis Parameters.

AutorGuerrero Bustos, Ana María; Goñi Elizalde, Sara; Campillo, Igor; Moragues, A.
Palabras claveBelite cement clinker
Coal fly ash
High Calcium content
Synthesis process
CO2 emissions
Industrial waste reuse
Fecha de publicación2004
EditorAmerican Chemical Society
CitaciónEnvironmental Science and Technology 38(11): 3209-3213 (2004)
ResumenThe optimization of parameters of synthesis of belite cement clinker from coal fly ash of high Ca content is presented in this paper. The synthesis process is based on the hydrothermal-calcination-route of the fly ash without extra additions. The hydrothermal treatment was carried out in demineralized water and a 1 M NaOH solution for 4h at the temperatures of 100 °C, 150 °C, and 200 °C. The precursors obtained during the hydrothermal treatment were heated at temperatures of 700 °C, 800 °C, 900 °C, and 1000 °C. The changes of fly ash composition after the different treatments were characterized by X-ray diffraction (XRD), FT infrared (FTIR) spectroscopy, surface area (BETN2), and thermal analyses. From the results obtained we concluded that the optimum temperature of the hydrothermal treatment was 200 °C, and the optimum temperature for obtaining the belite cement clinker was 800 °C.
Descripción5 pages.-- Final full-text version of the paper available at: http://dx.doi.org/10.1021/es0351589.
Aparece en las colecciones: (IETCC) Artículos
Ficheros en este ítem:
No hay ficheros asociados a este ítem.
Mostrar el registro completo

NOTA: Los ítems de Digital.CSIC están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.