English   español  
Por favor, use este identificador para citar o enlazar a este item: http://hdl.handle.net/10261/48590
COMPARTIR / IMPACTO:
Estadísticas
logo share SHARE logo core CORE   Add this article to your Mendeley library MendeleyBASE

Visualizar otros formatos: MARC | Dublin Core | RDF | ORE | MODS | METS | DIDL
Exportar a otros formatos:
Título

BSCF epitaxial thin films: Electrical transport and oxygen surface exchange

AutorBurriel, Mónica; Santiso, José
Palabras claveBSCF
Epitaxial thin films
PLD
Electrical conductivity
Fecha de publicaciónmay-2010
EditorElsevier
CitaciónSolid State Ionics 181(13-14): 602-608 (2010)
ResumenBa0.5Sr0.5Co0.8Fe0.2O3−δ (BSCF) shows promising oxygen transport properties for the use as oxygen separation membranes and cathode material for solid oxide fuel cells. In order to evaluate the electrical conductivity properties as well as surface exchange coefficients without the influence of grain boundaries present in polycrystalline bulk samples, high-quality epitaxial BSCF thin films on single crystal NdGaO3 (110) (NGO) substrates were prepared for the first time. This was achieved by pulsed laser deposition (PLD) using single-phase cubic targets sintered from powder prepared via the mixed oxide route. Structural and compositional properties of the thin films were verified by various X-ray diffraction techniques as well as by scanning electron microscopy (SEM). The electrical conductivity of the thin films was measured in dependence of temperature and compared to values obtained by measurements on polycrystalline bulk samples from the same powder as well as data from literature, showing different activation energies and higher general conductivity. Dependence of the conductivity on oxygen partial pressure has also been studied, revealing a rather small variation and indicating a possible phase change beginning to occur at oxygen partial pressures below 10−4 bar. Additionally, the surface exchange coefficient kChem of the purely surface exchange controlled samples was determined by a conductivity relaxation technique and yielded an activation energy of 93 kJ/mol.
Descripción7 páginas, 10 figuras, 1 tabla.-- et al.
Versión del editorhttp://dx.doi.org/10.1016/j.ssi.2010.03.005
URIhttp://hdl.handle.net/10261/48590
DOI10.1016/j.ssi.2010.03.005
ISSN0167-2738
Aparece en las colecciones: (CIN2) Artículos
Ficheros en este ítem:
No hay ficheros asociados a este ítem.
Mostrar el registro completo
 

Artículos relacionados:


NOTA: Los ítems de Digital.CSIC están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.