English   español  
Please use this identifier to cite or link to this item: http://hdl.handle.net/10261/32658
Share/Impact:
Statistics
logo share SHARE logo core CORE   Add this article to your Mendeley library MendeleyBASE

Visualizar otros formatos: MARC | Dublin Core | RDF | ORE | MODS | METS | DIDL
Exportar a otros formatos:

Title

Alkali activation of fly ash. Part III: Effect of curing conditions on reaction and its graphical description

AuthorsCriado, María ; Fernández-Jiménez, Ana; Palomo, Ángel
KeywordsAlkali activated
Fly ash
Relative humidity
Microscopic and nanostructural model
Issue DateNov-2010
PublisherElsevier
CitationFuel 89(11): 3185-3192(2010)
AbstractThe micro- and nano-structural characteristics of the reaction products of fly ash alkali activation depend, among others, on the curing conditions used: temperature, time and relative humidity. The present study focuses primarily on relative humidity. When the material is cured in air-tight containers, the silicon content of the initial aluminium-rich material gradually increases. This end product is dense and compact. When samples are in direct contact with the atmosphere, however, early age carbonation takes place, resulting in water loss and persistence of a high-aluminium content. This resulting material is granular and develops lower mechanical strength than the paste cured under high RH conditions. The main nano- and micro-structural differences observed in the materials as a result of different curing conditions have been shown through a graphical description of the reactions.
Publisher version (URL)http://dx.doi.org/10.1016/j.fuel.2010.03.051
URIhttp://hdl.handle.net/10261/32658
DOI10.1016/j.fuel.2010.03.051
ISSN0016-2361
Appears in Collections:(IETCC) Artículos
Files in This Item:
There are no files associated with this item.
Show full item record
Review this work
 

Related articles:


WARNING: Items in Digital.CSIC are protected by copyright, with all rights reserved, unless otherwise indicated.