Please use this identifier to cite or link to this item: http://hdl.handle.net/10261/32167
Share/Export:
logo share SHARE logo core CORE BASE
Visualizar otros formatos: MARC | Dublin Core | RDF | ORE | MODS | METS | DIDL | DATACITE
Title

Pore solution in alkali-activated slag cement pastes. Relation to the composition and structure of calcium silicate hydrate

AuthorsFernández-Jiménez, Ana ; Puertas, Francisca; Blanco-Varela, María Teresa
KeywordsAlkali-activated cements
Pore solution
Calcium silicate hydrate
Microstructure
Issue DateJan-2004
PublisherElsevier
CitationCement and Concrete Research. 34(1): 139-148 (2004)
AbstractIn this work, the relationship between the composition of pore solution in alkali-activated slag cement (AAS) pastes activated with different alkaline activator, and the composition and structure of the main reaction products, has been studied. Pore solution was extracted from hardened AAS pastes. The analysis of the liquids was performed through different techniques: Na, Mg and Al by atomic absorption (AA), Ca ions by ionic chromatography (IC) and Si by colorimetry; pH was also determined. The solid phases were analysed by XRD, FTIR, solid-state 29Si and 27Al NMR and BSE/EDX. The most significant changes in the ionic composition of the pore solution of the AAS pastes activated with waterglass take place between 3 and 24 h of reaction. These changes are due to the decrease of the Na content and mainly to the Si content. Results of 29Si MAS NMR and FTIR confirm that the activation process takes place with more intensity after 3 h (although at this age, Q2 units already exist). The pore solution of the AAS pastes activated with NaOH shows a different evolution to this of pastes activated with waterglass. The decrease of Na and Si contents progresses with time. The nature of the alkaline activator influences the structure and composition of the calcium silicate hydrate formed as a consequence of the alkaline activation of the slag. The characteristic of calcium silicate hydrate in AAS pastes activated with waterglass is characterised by a low structural order with a low Ca/Si ratio. Besides, in this paste, Q3 units are detected. The calcium silicate hydrate formed in the pastes activated with NaOH has a higher structural order (higher crystallinity) and contains more Al in its structure and a higher Ca/Si ratio than those obtained with waterglass.
Publisher version (URL)http://dx.doi.org/10.1016/S0008-8846(03)00254-0
URIhttp://hdl.handle.net/10261/32167
DOI10.1016/S0008-8846(03)00254-0
ISSN0008-8846
Appears in Collections:(IETCC) Artículos

Show full item record
Review this work

SCOPUSTM   
Citations

218
checked on May 12, 2022

WEB OF SCIENCETM
Citations

198
checked on May 13, 2022

Page view(s)

400
checked on May 17, 2022

Google ScholarTM

Check

Altmetric

Dimensions


WARNING: Items in Digital.CSIC are protected by copyright, with all rights reserved, unless otherwise indicated.