English   español  
Please use this identifier to cite or link to this item: http://hdl.handle.net/10261/242088
logo share SHARE logo core CORE   Add this article to your Mendeley library MendeleyBASE

Visualizar otros formatos: MARC | Dublin Core | RDF | ORE | MODS | METS | DIDL | DATACITE
Exportar a otros formatos:


Kinetic Analysis of the Transformation from 14M Martensite to L21 Austenite in Ni-Fe-Ga Melt Spun Ribbons

AuthorsManchón-Gordón, Alejandro F.; López-Martín, Raul; Ipus, Jhon J.; Blázquez, Javier S.; Svec, Peter; Conde, Clara F.; Conde, Alejandro
Martensitic transformation
Kinetic analysis
Issue Date2021
PublisherMultidisciplinary Digital Publishing Institute
CitationMetals, 11: 849 (2021)
AbstractIn this study, the non-isothermal kinetics of the martensitic transition from 14M modulated martensite to austenite phase in Ni55Fe19Ga26 ribbons obtained by melt-spinning has been analyzed. The proximity of the martensitic transition to room temperature makes it very sensitive to pressure and subtle differences for different pieces of the ribbon (ascribed to stresses stored in the ribbon during its rapid solidification process). Despite the dispersion in the characteristic parameters of the transition, a general behavior is observed with a decreasing activation energy as the heating rate increases due to the nucleation driven character of the transition. It has been shown that a first-order autocatalysis can describe the temperature evolution of the austenite fraction using only two experimental temperatures. Predicted curves are in good agreement with experimental data
Publisher version (URL)https://doi.org/10.3390/met11060849
Appears in Collections:(ICMS) Artículos
Files in This Item:
File Description SizeFormat 
metals-11-00849.pdf2,3 MBAdobe PDFThumbnail
Show full item record
Review this work

WARNING: Items in Digital.CSIC are protected by copyright, with all rights reserved, unless otherwise indicated.