English   español  
Por favor, use este identificador para citar o enlazar a este item: http://hdl.handle.net/10261/22330
Compartir / Impacto:
Estadísticas
Add this article to your Mendeley library MendeleyBASE
Citado 9 veces en Web of Knowledge®  |  Ver citas en Google académico
Visualizar otros formatos: MARC | Dublin Core | RDF | ORE | MODS | METS | DIDL
Título

Copper corrosion initiated by butyric acid vapors

AutorCano Díaz, Emilio ; Mora, E. M.; Azcaray, H.; Bastidas Rull, José María
Fecha de publicación18-feb-2004
EditorElectrochemical Society
CitaciónJournal of the Electrochemical Society 151(4): B207-B213 (2004)
ResumenCopper corrosion initiated by butyric acid vapors [CH3(CH2)2COOH] ranging from 0.1 to 100 ppm at 100% relative humidity was studied. The copper corrosion rate at 0.1 and 100 ppm pollutant levels was 8.5 and 630 mg m–2 d–2, respectively. Corrosion products were characterized using X-ray diffraction and X-ray photoelectron spectroscopy analyses and their morphology was observed by scanning electron microscopy (SEM). The main compounds identified were cuprite and a copper butyrate compound. The amount of cuprite decreased as the pollution level increased. Copper butyrate was observed from the lowest concentrations, and its amount increased with the butyric acid vapor concentration. The patina formed was very porous and provided little protection to the underlying copper.
Descripción7 pages.
Versión del editorhttp://dx.doi.org/10.1149/1.1649234
URIhttp://hdl.handle.net/10261/22330
DOI10.1149/1.1649234
ISSN0013-4651
Aparece en las colecciones: (CENIM) Artículos
Ficheros en este ítem:
No hay ficheros asociados a este ítem.
Mostrar el registro completo
 



NOTA: Los ítems de Digital.CSIC están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.