English   español  
Por favor, use este identificador para citar o enlazar a este item: http://hdl.handle.net/10261/20625
Compartir / Impacto:
Estadísticas
Add this article to your Mendeley library MendeleyBASE
Visualizar otros formatos: MARC | Dublin Core | RDF | ORE | MODS | METS | DIDL
Título

Nickel–alumina graded coatings obtained by dipping and EPD on nickel substrates

AutorFerrari-Fernández, Begoña; Sánchez Herencia, Antonio Javier; Moreno Botella, Rodrigo María
Palabras claveShaping
Suspensions
Fecha de publicación2006
EditorElsevier
CitaciónJournal of the European Ceramic Society 26 (2006) 2205–2212
ResumenNickel substrates have been coated by Ni/Al2O3 composite films by a dipping process using aqueous suspensions that contain a temporary binder. Two-layer and three-layer graded coatings have been produced, consisting of pure Ni powder and Ni/Al2O3 composites with Al2O3 contents of 15 and 30 vol.% as intermediate layers to release sintering and thermal stresses. The laminates were further coated with a ceramic layer of Al2O3/ZrO2 that was deposited by electrophoretic deposition using a non-aqueous suspension. A continuous, thin Al2O3 layer surrounding Ni grains developed at the intermediate composite layer of Ni/Al2O3 allows the ceramic coating to maintain strongly adhered to the nickel substrate by means of a porous substrate/coating interface.
Versión del editorhttp://dx.doi.org/10.1016/j.jeurceramsoc.2005.04.009
URIhttp://hdl.handle.net/10261/20625
DOI10.1016/j.jeurceramsoc.2005.04.009
Aparece en las colecciones: (ICV) Artículos
Ficheros en este ítem:
No hay ficheros asociados a este ítem.
Mostrar el registro completo
 

Artículos relacionados:


NOTA: Los ítems de Digital.CSIC están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.