Por favor, use este identificador para citar o enlazar a este item: http://hdl.handle.net/10261/201999
COMPARTIR / EXPORTAR:
logo share SHARE logo core CORE BASE
Visualizar otros formatos: MARC | Dublin Core | RDF | ORE | MODS | METS | DIDL | DATACITE

Invitar a revisión por pares abierta
Título

Microstructure, interfaces and properties of 3YTZP ceramic composites with 10 and 20 vol% different graphene-based nanostructures as fillers

AutorMuñoz-Ferreiro, Carmen; Morales-Rodríguez, A.; Rojas, T. Cristina; Jiménez-Piqué, Emilio; López-Pernía, Cristina; Poyato, Rosalía CSIC ORCID; Gallardo-López, Ángela
Fecha de publicación2019
EditorElsevier BV
CitaciónJournal of Alloys and Compounds: 213- 224 (2019)
ResumenThe graphene family comprises not only single layer graphene but also graphene-based nanomaterials (GBN), with remarkably different number of layers, lateral dimension and price. In this work, two of these GBN, namely graphene nanoplatelets (GNP) with n∼15–30 layers and few-layer graphene (FLG) with n < 3 layers have been evaluated as fillers in 3 mol% yttria stabilized tetragonal zirconia (3YTZP) ceramic composites. Composites with 10 and 20 vol% GNP or FLG have been fabricated by wet powder processing and spark plasma sintering (SPS) and the influence of the content and number of layers of the graphene-based filler has been assessed. For both graphene-based fillers, an intermediate zirconia oxycarbide has been detected in the grain boundaries. The lower stacking degree and much more homogeneous distribution of the FLG, revealed by transmission electron microscopy (TEM), can improve load transfer between the GBNs and the ceramic matrix. However, high FLG contents lower densification of the composites, due partly to the larger FLG interplanar spacing also estimated by TEM. The hardness (both Vickers and nanoindentation) and the elastic modulus decrease with increased GBN content and with improved graphene dispersion. The FLG greatly inhibit the crack propagation that occur perpendicular to their preferential orientation plane. The composites with thinner FLG have higher electrical conductivity than those with GNP. The highest electrical conductivity is achieved by composites with 20 vol% FLG in the direction perpendicular to the compression axis during sintering, σ = 3400 ± 500 Sm.
Versión del editorhttp://dx.doi.org/10.1016/j.jallcom.2018.10.336
URIhttp://hdl.handle.net/10261/201999
DOI10.1016/j.jallcom.2018.10.336
Identificadoresdoi: 10.1016/j.jallcom.2018.10.336
issn: 0925-8388
Aparece en las colecciones: (ICMS) Artículos

Ficheros en este ítem:
Fichero Descripción Tamaño Formato
Rosalia.docx17,63 MBMicrosoft Word XMLVisualizar/Abrir
Mostrar el registro completo

CORE Recommender

SCOPUSTM   
Citations

22
checked on 22-mar-2024

WEB OF SCIENCETM
Citations

15
checked on 25-feb-2024

Page view(s)

158
checked on 28-mar-2024

Download(s)

76
checked on 28-mar-2024

Google ScholarTM

Check

Altmetric

Altmetric


NOTA: Los ítems de Digital.CSIC están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.