English   español  
Por favor, use este identificador para citar o enlazar a este item: http://hdl.handle.net/10261/19914
COMPARTIR / IMPACTO:
Estadísticas
logo share SHARE logo core CORE   Add this article to your Mendeley library MendeleyBASE

Visualizar otros formatos: MARC | Dublin Core | RDF | ORE | MODS | METS | DIDL
Exportar a otros formatos:
Título

Feasibility of determining corrosion rates by means of stray current-induced polarisation

AutorAndrade, C.; Martínez Sierra, Isabel; Castellote, M.
Palabras claveCorrosion
Equivalent circuit
Induction
Non-contact method
Polarisation resistance
Fecha de publicación27-may-2008
EditorSpringer
CitaciónJournal of Applied Electrochemistry 38(10): 1467-1476 (2008)
ResumenTo measure metal corrosion it is necessary to make direct physical contact with the specimen or component acting as the working electrode. The most widely used method for determining the corrosion current is electrochemical, the so-called polarisation resistance method. The feasibility of a new method to polarise the metal without the need for direct physical contact was investigated in the present study. The required potential shift is obtained by induction of a current using an external electrical field. The model used for calculation of the corrosion rate assumes that the applied current runs in parallel through the electrolyte and the metal, and electrostatically polarises the metal. The overall electrical resistance of the system can then be expressed as $$ \frac{1} {{R_{{{\text{e + M}}}} }} = \frac{1} {{R_{{\text{e}}} }} + \frac{1} {{R_{{\text{M}}} }} $$, where R e+M is the total resistance measured, R e is electrolyte resistance and R M is resistance due to the metal. This latter resistance to electrostatic polarisation is related to the faradaic reaction, which was verified by comparison with the gravimetric losses. This resistance has been called inductive polarisation resistance R pi to distinguish it from the traditional polarisation resistance R p.
DescripciónPublicación versión impresa: Octubre de 2008
Versión del editorhttp://dx.doi.org/10.1007/s10800-008-9591-6
URIhttp://hdl.handle.net/10261/19914
DOI10.1007/s10800-008-9591-6
ISSN0021-891X (Print)
1572-8838 (Online)
Aparece en las colecciones: (CISDEM) Artículos
Ficheros en este ítem:
No hay ficheros asociados a este ítem.
Mostrar el registro completo
 

Artículos relacionados:


NOTA: Los ítems de Digital.CSIC están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.