English   español  
Por favor, use este identificador para citar o enlazar a este item: http://hdl.handle.net/10261/19900
Compartir / Impacto:
Estadísticas
Add this article to your Mendeley library MendeleyBASE
Citado 23 veces en Web of Knowledge®  |  Ver citas en Google académico
Visualizar otros formatos: MARC | Dublin Core | RDF | ORE | MODS | METS | DIDL
Título

Effect of incorporating ferroalloy industry wastes as complementary cementing materials on the properties of blended cement matrices

AutorFrías, Moisés; Rodríguez, C.
Palabras claveFerroalloys production wastes
Pozzolanic activity
New blended cements
Physicomechanical properties
Fecha de publicaciónmar-2008
EditorElsevier
CitaciónCement and Concrete Composites 30(3): 212-219 (2008)
ResumenThe main purpose of this study is to evaluate the characteristics of two by-products obtained during ferroalloys production, SiMn slag and Mn oxide filter cakes, and their possible use as complementary cementing materials for commercial Portland cement manufacturing, considering 5% and 15% additions. The results obtained have revealed that by-product characteristics make them suitable to be added to blended cement production processes since they fulfill the European regulations for the chemical, physical and mechanical requirements. Regarding the Mn oxide filter cakes use, a strength loss has been detected in blended cement mortars after a 90 days curing, although pore size distribution in this case is similar to that of a control mortar.
Versión del editorhttp://dx.doi.org/10.1016/j.cemconcomp.2007.05.004
URIhttp://hdl.handle.net/10261/19900
DOI10.1016/j.cemconcomp.2007.05.004
ISSN0958-9465
Aparece en las colecciones: (IETCC) Artículos
Ficheros en este ítem:
No hay ficheros asociados a este ítem.
Mostrar el registro completo
 



NOTA: Los ítems de Digital.CSIC están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.