English   español  
Por favor, use este identificador para citar o enlazar a este item: http://hdl.handle.net/10261/19894
logo share SHARE logo core CORE   Add this article to your Mendeley library MendeleyBASE

Visualizar otros formatos: MARC | Dublin Core | RDF | ORE | MODS | METS | DIDL
Exportar a otros formatos:

Calorimetry of Portland cement with metakaolins, quartz and gypsum additions

AutorRahhal, V.; Talero Morales, Rafael
Palabras claveCalorimetry
Portland cement
Reactive alumina
Setting control
Fecha de publicaciónmar-2008
Akadémiai Kiadó (Budapest)
Kluwer Academic Publishers
CitaciónJournal of Thermal Analysis and Calorimetry 91(3): 825-834 (2008)
ResumenIn this work two aluminic pozzolans (metakaolins) and a non-pozzolan were added to two Portland cements with very different mineral composition, to determine the effect on the rate of heat release and the mechanisms involved. The main analytical techniques deployed were: conduction calorimetry, pozzolanicity and XRD. The results showed that the two metakaolins induced stimulation of the hydration reactions due to the generation of pozzolanic activity at very early stage, because of their reactive alumina, Al2O3r− contents, mainly. Such stimulation was found to be more specific than generic for more intense C3A hydration than C3S, at least at very early on into the reaction, and more so when 7.0% SO3 was added, and for this reason, such stimulation is described as ‘indirect’ to differentiate it from the ‘direct’ variety. As a result of both stimulations, the heat of hydration released is easy to assimilate to a Synergistic Calorific Effect.
Versión del editorhttp://dx.doi.org/10.1007/s10973-006-8250-6
ISSN1388-6150 (Print)
1572-8943 (Online)
Aparece en las colecciones: (IETCC) Artículos
Ficheros en este ítem:
No hay ficheros asociados a este ítem.
Mostrar el registro completo

Artículos relacionados:

NOTA: Los ítems de Digital.CSIC están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.