English   español  
Please use this identifier to cite or link to this item: http://hdl.handle.net/10261/186668
Share/Impact:
Statistics
logo share SHARE logo core CORE   Add this article to your Mendeley library MendeleyBASE

Visualizar otros formatos: MARC | Dublin Core | RDF | ORE | MODS | METS | DIDL
Exportar a otros formatos:

DC FieldValueLanguage
dc.contributor.authorJuárez-H., Lorena-
dc.contributor.authorPérez Pariente, Joaquín-
dc.contributor.authorAguilar-P., Julia-
dc.contributor.authorMugica-A., Violeta-
dc.contributor.authorGutierrez-A, M.-
dc.contributor.authorGrande Casas, María Sol-
dc.contributor.authorMárquez Álvarez, Carlos-
dc.contributor.authorSastre, Enrique-
dc.date.accessioned2019-07-24T06:53:26Z-
dc.date.available2019-07-24T06:53:26Z-
dc.date.issued2015-02-
dc.identifier.citationJournal of Porous Materials 22(1): 269-281 (2014)-
dc.identifier.issn1380-2224-
dc.identifier.urihttp://hdl.handle.net/10261/186668-
dc.description.abstractMesoporous materials with Si/Al ratio 7, 19 and 23 have been synthesized from ZSM-5 zeolite precursors prepared from tetrapropylammonium cations-containing clear aluminosilicate solutions, in the presence of the surfactant cetyltrimethylammonium bromide, and by employing different precursors of secondary mesoporosity or mesoporogen agents, such as nanometric carbon particles (BP700 and BP2000) and the biopolymer chitosan. The synthesized materials were characterized by X-ray diffraction, FT infrared spectroscopy, thermogravimetric analysis, electron microscopy, chemical analysis and nitrogen adsorption. It has been found that the effect of the pore-forming agents depends on the Si/Al ratio of the material, it is very small for Si/Al = 7, while for Si/Al above 19, there is a substantial increase of the secondary mesoporosity due to the mesoporogen agent, being this effect more evident for the sample with Si/Al = 23. For this material, in addition to the porosity associated to pores with a narrow size distribution centered at 3.7 nm due to the surfactant, secondary mesopores with a size distribution centered at 20–30 nm for carbon nanoparticles and in the range 4–10 nm for chitosan, are also detected. The acidity of the samples increases with their Si/Al ratio, and no significant effect of the porogen agent on the acidity has been found. The catalytic properties of these materials were tested in the conversion of m-xylene and in the cracking of low-density polyethylene (LDPE). Noticeable differences in the activity and selectivity of the gas/liquid products obtained in the catalytic cracking of LDPE were observed.-
dc.description.sponsorshipAuthors are grateful to the bilateral CONACYT (México)/CSIC (Spain) collaboration project 2008MX0051 and to Ministerio de Economía y Competitividad (MINECO, Spain) for financial funding through the MAT2012-31127 projects.-
dc.publisherSpringer-
dc.rightsclosedAccess-
dc.subjectXylene-
dc.subjectMesoporous materials-
dc.subjectLow-density-poly-ethylene (LDPE)-
dc.subjectMCM-41-
dc.subjectNanometric carbon-
dc.subjectChitosan-
dc.titleMesoporous materials with enhanced porosity and acidity to obtain clean fuels from low-density polyethylene (LDPE) cracking-
dc.typeartículo-
dc.identifier.doi10.1007/s10934-014-9893-5-
dc.relation.publisherversionhttps://doi.org/10.1007/s10934-014-9893-5-
dc.identifier.e-issn1573-4854-
dc.date.updated2019-07-24T06:53:26Z-
dc.description.versionPeer Reviewed-
dc.language.rfc3066eng-
dc.contributor.funderConsejo Nacional de Ciencia y Tecnología (México)-
dc.contributor.funderConsejo Superior de Investigaciones Científicas (España)-
dc.contributor.funderMinisterio de Economía y Competitividad (España)-
dc.relation.csic-
dc.identifier.funderhttp://dx.doi.org/10.13039/501100003329es_ES
dc.identifier.funderhttp://dx.doi.org/10.13039/501100003339es_ES
dc.identifier.funderhttp://dx.doi.org/10.13039/501100003141es_ES
Appears in Collections:(ICP) Artículos
Files in This Item:
File Description SizeFormat 
accesoRestringido.pdf15,38 kBAdobe PDFThumbnail
View/Open
Show simple item record
 

Related articles:


WARNING: Items in Digital.CSIC are protected by copyright, with all rights reserved, unless otherwise indicated.