English   español  
Please use this identifier to cite or link to this item: http://hdl.handle.net/10261/181522
logo share SHARE logo core CORE   Add this article to your Mendeley library MendeleyBASE

Visualizar otros formatos: MARC | Dublin Core | RDF | ORE | MODS | METS | DIDL
Exportar a otros formatos:

Effect of alkaline earth dopant on density, mechanical, and electrical properties of Cu0.97AE0.03CrO2 (AE = Mg, Ca, Sr, and Ba) delafossite oxide

AuthorsMadre, M. A.; Torres, M. A.; Gomez, J. A.; Diez, J. C.; Sotelo, A.
Electrical properties
Issue Date2019
CitationJournal of the Australian Ceramic Society 55(1): 257-263 (2019)
AbstractCuCrO2 and Cu0.97AE0.03CrO2 (AE = Mg, Ca, Sr, and Ba) polycrystalline materials have been prepared through the classical solid state route. CuCrO2 is the major phase in all cases, with larger grain sizes when the alkaline earth dopant is larger. Doping also promotes the formation of secondary phases, which appear in the grain boundaries in the Ca, Sr, and Ba doped samples. Density has been drastically improved through doping, reflected in lower electrical resistivities and higher mechanical properties than the measured in undoped samples. In spite of a relatively high decrease of Seebeck coefficient, all doped samples reached higher power factor values than the undoped ones in the whole measured temperature range. The highest power factor has been reached in Mg doped samples, 0.32 mW/K2 m at 800 °C, which is among the highest obtained so far in randomly oriented polycrystalline CuCrO2 materials.
Publisher version (URL)https://doi.org/10.1007/s41779-018-0230-3
Appears in Collections:(ICMA) Artículos
Files in This Item:
File Description SizeFormat 
Manuscript 181522.pdf513,64 kBAdobe PDFThumbnail
Show full item record
Review this work

Related articles:

WARNING: Items in Digital.CSIC are protected by copyright, with all rights reserved, unless otherwise indicated.