English   español  
Please use this identifier to cite or link to this item: http://hdl.handle.net/10261/176648
Share/Impact:
Statistics
logo share SHARE logo core CORE   Add this article to your Mendeley library MendeleyBASE

Visualizar otros formatos: MARC | Dublin Core | RDF | ORE | MODS | METS | DIDL
Exportar a otros formatos:

Title

Effects of the speed ratio on the efficiency of planetary mills

AuthorsReal, Concepción ; Gotor, F.J.
Issue Date2019
PublisherElsevier
CitationHelyon, 5(2): e01227 (2019)
AbstractThe ignition time (tig) of the mechanically induced self-sustaining reaction (MSR) process involving the formation of TiB2 from Ti/2B elemental mixtures was used to study the influence of the ratio (k = -ωv/ωd) between the rotational speed of the supporting disc (ωd) and vials (ωv) on the milling efficiency of a Pulverisette 4 planetary mill. The variation of the inverse of the ignition time (1/tig), which is directly related to the milling power provided by the planetary mill, with the process conditions has shown that it is not possible to find a single k value as optimal independently of the experimental conditions used (ωd and the ball-to-powder ratio, BPR). Moreover, it was observed that the lowest milling efficiency (longer tig values) was found for k = 1, which is the usual value employed in routine laboratory works. The best efficiencies were found for the larger k values (2.5 or 3). At lower ωd, the shortest tig was obtained for k = 2.5 and at higher ωd for k = 3, independently of BPR.
Publisher version (URL)http://doi.org/10.1016/j.heliyon.2019.e01227
URIhttp://hdl.handle.net/10261/176648
DOI10.1016/j.heliyon.2019.e01227
Appears in Collections:(ICMS) Artículos
Files in This Item:
File Description SizeFormat 
1-s2.0-S2405844018365526-main.pdf563,73 kBAdobe PDFThumbnail
View/Open
Show full item record
Review this work
 

Related articles:


WARNING: Items in Digital.CSIC are protected by copyright, with all rights reserved, unless otherwise indicated.