English   español  
Please use this identifier to cite or link to this item: http://hdl.handle.net/10261/173242
logo share SHARE   Add this article to your Mendeley library MendeleyBASE

Visualizar otros formatos: MARC | Dublin Core | RDF | ORE | MODS | METS | DIDL
Exportar a otros formatos:

Creep study on alumina and alumina/SWCNT nanocomposites

AuthorsCastillo-Rodríguez, Miguel; Muñoz, Antonio; Domínguez-Rodríguez, Arturo
KeywordsMechanical properties
Issue Date2018
CitationJournal of the European Ceramic Society 38: 5497- 5502 (2018)
AbstractAlumina and alumina/SWCNT nanocomposites have been sintered by spark plasma sintering, obtaining relative densities higher than 99%. Microstuctural characterization revealed a grain microstructure in the submicron range, where alumina/SWCNT nanocomposites exhibited a good CNTs dispersion thought the ceramic matrix. Creep experiments performed in both materials showed a similar mechanical behavior, where the addition of CNTs seems to have a negligible effect on the strain rate, in contrast to results reported by other authors. Grain boundary sliding accommodated by lattice diffusion has been identified as the high temperature deformation mechanisms in both samples, alumina and alumina/SWCNT nanocomposites. We have discussed about the role of CNTs influence on the plasticity of these composites.
Identifiersdoi: 10.1016/j.jeurceramsoc.2018.08.013
issn: 1873-619X
Appears in Collections:(ICMS) Artículos
Files in This Item:
File Description SizeFormat 
revised manuscript def.pdf Embargoed until August 10, 20204,76 MBAdobe PDFThumbnail
View/Open    Request a copy
Show full item record
Review this work

WARNING: Items in Digital.CSIC are protected by copyright, with all rights reserved, unless otherwise indicated.