Por favor, use este identificador para citar o enlazar a este item:
http://hdl.handle.net/10261/172682
COMPARTIR / EXPORTAR:
SHARE CORE BASE | |
Visualizar otros formatos: MARC | Dublin Core | RDF | ORE | MODS | METS | DIDL | DATACITE | |
Título: | Combination of in-situ diffraction experiments and acoustic emission testing to understand the compression behavior of Mg-YZn alloys containing LPSO phase under different loading conditions |
Autor: | Garcés, Gerardo CSIC ORCID; Máthis, K.; Medina, Judit CSIC ORCID; Horváth, Klaudia; Drozdenko, Daria; Oñorbe, Elvira CSIC ORCID; Dobroň, P.; Pérez Zubiaur, Pablo CSIC ORCID; Klaus, M.; Adeva, Paloma CSIC ORCID CVN | Palabras clave: | In-situ testing Mechanical testing Strengthening mechanisms Anisotropic material Twinning |
Fecha de publicación: | 2018 | Editor: | Elsevier | Citación: | International Journal of Plasticity 106: 107-128 (2018) | Resumen: | The effect of the orientation of the non-recrystallized grains (non-DRX) and the LPSO phase on plasticity in extruded MgYZn alloy with a bimodal grain structure have been studied in-situ using the combination of synchrotron diffraction and acoustic emission techniques during compression tests. The adaptive sequential k-means (ASK) procedure was applied to analyze the acoustic emission signal. This method can successful separate the signal for each possible deformation systems. Combining both techniques, the deformation mechanisms that take place during the compression tests under different loading directions have been distinguish. Independently of the loading direction, the beginning of the macroscopic plasticity is always controlled by the activation of basal slip system in the DRX grains. However, highly oriented non-DRX grains and LPSO phase have a strong influence over the compressive deformation of the MgYZn alloy. The basal planes in the non-DRX grains were oriented parallel to the extrusion direction (ED). Thus, the activation of the extension twinning was found to be significant only in the ED mode. In the other two loading cases, TD and 45, the activation of non-basal slip systems has been detected. On the other hand, the reinforcing effect of the elongated LPSO phase is the most effective, if the loading axis is aligned with the fiber direction (extrusion direction) since the load transfer mechanism is more effective. In this loading case, the LPSO can be plastically deformed due to kinking. This deformation mode has been isolated by the ASK procedure and characterized by in-situ scanning electron microscopy. | Versión del editor: | https://doi.org/10.1016/j.ijplas.2018.03.004 | URI: | http://hdl.handle.net/10261/172682 | DOI: | 10.1016/j.ijplas.2018.03.004 | Identificadores: | doi: 10.1016/j.ijplas.2018.03.004 issn: 0749-6419 |
Aparece en las colecciones: | (CENIM) Artículos |
Ficheros en este ítem:
Fichero | Descripción | Tamaño | Formato | |
---|---|---|---|---|
accesoRestringido.pdf | 15,38 kB | Adobe PDF | Visualizar/Abrir |
CORE Recommender
SCOPUSTM
Citations
67
checked on 29-feb-2024
WEB OF SCIENCETM
Citations
69
checked on 29-feb-2024
Page view(s)
343
checked on 18-mar-2024
Download(s)
121
checked on 18-mar-2024
Google ScholarTM
Check
Altmetric
Altmetric
NOTA: Los ítems de Digital.CSIC están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.