English   español  
Please use this identifier to cite or link to this item: http://hdl.handle.net/10261/169290
Share/Impact:
Statistics
logo share SHARE logo core CORE   Add this article to your Mendeley library MendeleyBASE

Visualizar otros formatos: MARC | Dublin Core | RDF | ORE | MODS | METS | DIDL
Exportar a otros formatos:

Title

Carboxylates versus fluorines: Boosting the emission properties of commercial BODIPYs in liquid and solid media

AuthorsDuran-Sampedro, G. ; Agarrabeitia, A.R.; Cerdán, L. ; Pérez-Ojeda, M.Eugenia; Costela, A. ; Garcia-Moreno, I. ; Esnal, I.; Bañuelos Prieto, Jorge; López-Arbeloa, Íñigo; Ortiz, M.J.
Issue Date2013
PublisherJohn Wiley & Sons
CitationAdvanced Functional Materials 23: 4195- 4205 (2013)
AbstractA new and facile strategy for the development of photonic materials is presented that fufills the conditions of being efficient, stable, and tunable laser emitters over the visible region of spectrum, with the possibility of being easily processable and cost-effective. This approach uses poly(methyl methacrylate) (PMMA) as a host for new dyes with improved efficiency and photostability synthesized. Using a simple protocol, fluorine atoms in the commercial (4,4-difluoro-4-bora-3a,4a-diaza-s-indacene) (F-BODIPY) by carboxylate groups. The new O-BODIPYs exhibit enhanced optical properties and laser behavior both in the liquid and solid phases compared to their commercial analogues. Lasing efficiencies up to 2.6 times higher than those recorded for the commercial dyes are registered with high photostabilities since the laser output remain at 80% of the initial value after 100 000 pump pulses in the same position of the sample at a repetition rate of 30 Hz; the corresponding commercial dye entirely loses its laser action after only 12 000 pump pulses. Distributed feedback laser emission is demonstrated with organic films incorporating new O-BODIPYs deposited onto quartz substrates engraved with appropriated periodical structures. These dyes exhibit laser thresholds up to two times lower than those of the corresponding parent dyes with lasing intensities up to one order of magnitude higher. The development of new O-BODIPYs, synthesized via the replacement of fluorine atoms by carboxylate groups in commercial (4,4-difluoro-4-bora-3a,4a-diaza-s-indacene) (F-BODIPYs), is a successful strategy to obtain optimized laser dyes. Poly(methyl methacrylate) (PMMA) doped with these new derivatives leads to laser materials that are economically affordable and have optimized emission properties in the visible spectral region. Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.
URIhttp://hdl.handle.net/10261/169290
Identifiersdoi: 10.1002/adfm.201300198
issn: 1616-301X
Appears in Collections:(IQFR) Artículos
Files in This Item:
File Description SizeFormat 
accesoRestringido.pdf15,38 kBAdobe PDFThumbnail
View/Open
Show full item record
Review this work
 

Related articles:


WARNING: Items in Digital.CSIC are protected by copyright, with all rights reserved, unless otherwise indicated.