English   español  
Please use this identifier to cite or link to this item: http://hdl.handle.net/10261/167763
Share/Impact:
Statistics
logo share SHARE logo core CORE   Add this article to your Mendeley library MendeleyBASE

Visualizar otros formatos: MARC | Dublin Core | RDF | ORE | MODS | METS | DIDL
Exportar a otros formatos:

Title

Introduction of aluminum to porous clay heterostructures to modify the adsorption properties

AuthorsPinto, M.L.; Saini, V.K.; Guil, J. M. ; Pires, J.
Issue Date2014
PublisherElsevier
CitationApplied Clay Science 101: 497- 502 (2014)
Abstract© 2014 Elsevier B.V. Porous clay heterostrucures (PCHs) are clay mineral based porous materials that have been mainly prepared by intercalation of structures with silica pore walls. In the present work the silica composition of the pore walls was modified by incorporating aluminum oxide, by a co-condensation methodology. Samples were characterized by nitrogen, water and toluene adsorption measurements. For the latter, heats of adsorption were measured using microcalorimetry. Characterization was also made by XRD, FTIR and chemical analysis by ICP and SEM-EDS. The materials were tested towards their selective adsorption properties, using chromatographic separation of toluene/. n-heptane and toluene/cyclohexane mixtures. The amounts of aluminum that were introduced in the PCHs by the co-condensation methodology without disrupting the porous structure were limited but, still, they were able to modify the selective adsorption properties of the samples. Above a certain value it produces disruption of the pore structure.
URIhttp://hdl.handle.net/10261/167763
Identifiersdoi: 10.1016/j.clay.2014.09.013
issn: 0169-1317
Appears in Collections:(IQFR) Artículos
Files in This Item:
File Description SizeFormat 
accesoRestringido.pdf15,38 kBAdobe PDFThumbnail
View/Open
Show full item record
Review this work
 

Related articles:


WARNING: Items in Digital.CSIC are protected by copyright, with all rights reserved, unless otherwise indicated.