English   español  
Please use this identifier to cite or link to this item: http://hdl.handle.net/10261/154807
Share/Impact:
Statistics
logo share SHARE   Add this article to your Mendeley library MendeleyBASE
Visualizar otros formatos: MARC | Dublin Core | RDF | ORE | MODS | METS | DIDL | DATACITE
Exportar a otros formatos:

DC FieldValueLanguage
dc.contributor.authorMartín, M. J.-
dc.contributor.authorMantilla, J. M.-
dc.contributor.authorCampo, D. del-
dc.contributor.authorHernanz, María Luisa-
dc.contributor.authorPons Aglio, Alicia-
dc.contributor.authorCampos Acosta, Joaquín-
dc.date.accessioned2017-09-06T10:28:12Z-
dc.date.available2017-09-06T10:28:12Z-
dc.date.issued2016-06-28-
dc.identifier.citationTEMPMEKO (2016)-
dc.identifier.urihttp://hdl.handle.net/10261/154807-
dc.descriptionXIII International Symposium on Temperature and Thermal Measurements in Industry and Science, Zakopane, Poland, 26 June - 02 July, 2016 ; http://www.tempmeko2016.pl/-
dc.description.abstractThe evolving mise en pratique for the definition of the kelvin (MeP-K) [1,2] will, in its second edition, encourage the realisation and dissemination of thermodynamic temperature either directly (primary thermometry), or indirectly (relative primary thermometry) via fixed points with assigned reference thermodynamic temperatures. Over the last few years, the Centro Español de Metrología (CEM), in collaboration with Instituto de Óptica of Consejo Superior de Investigaciones Científicas (IO-CSIC), has developed several set ups for the absolute calibration of standard radiation thermometers using the radiance method [3]. The aim of activities carried out in this area is two-fold: to realise thermodynamic temperature directly [4] and to measure the thermodynamic temperatures of several fixed points [5]. In order to carry out these calibrations, a system based in a monochromator or/and a laser and an integrating-sphere has been developed to calibrate CEM¿s standard radiation thermometers (KE- LP2 and KE-LP4) and a CEM filter radiometer (FIRA2 [6]). Different light sources have been used for measuring absolute spectral radiance responsivity: a Xe-Hg 500 W lamp, a supercontinuum laser NKT SuperK-EXR20 and a diode laser at 647,3 nm, 120 mW. Advantages and disadvantages of them have been studied: sensitivy to interferences generated by the laser inside the filter, flux stability generated by the lamps, etc. This paper will describe the set-ups used, the uncertainty budgets and the results for absolute temperatures of Cu, Co-C, Pt-C and Re-C fixed points, measured with these three thermometers (all with a 650 nm centred band).-
dc.rightsopenAccess-
dc.titlePerformance of different light sources for the absolute calibration of radiation therrnometers-
dc.typepóster de congreso-
dc.date.updated2017-09-06T10:28:18Z-
dc.description.versionPeer Reviewed-
dc.language.rfc3066eng-
dc.relation.csic-
Appears in Collections:(CFMAC-IO) Comunicaciones congresos
Files in This Item:
File Description SizeFormat 
Performance.pdf222,55 kBUnknownView/Open
Show simple item record
 


WARNING: Items in Digital.CSIC are protected by copyright, with all rights reserved, unless otherwise indicated.