English   español  
Por favor, use este identificador para citar o enlazar a este item: http://hdl.handle.net/10261/153262
Título

Indentation properties of ZrO2–SiO2 coatings on glass substrates

AutorGarcía Heras, Manuel ; Rincón López, Jesús María; Romero, Maximina; Villegas Broncano, María Ángeles
Palabras claveZrO2–SiO2 system
Sol–gel coatings
Indentation property
Fecha de publicaciónoct-2003
EditorElsevier
CitaciónMaterials Research Bulletin 38: 1635–1644 (2003)
ResumenSol–gel coatings of different composition in the ZrO2–SiO2 system have been prepared, starting from several precursors (alkoxides and alkylalkoxides). Common soda lime silicate glass slides were used as substrates for coating deposition. The Vickers microhardness,HV, of the coated glass substrates have slightly higher values than that of uncoated glass. Young modulus, E, values for coated glass substrates are higher than that of uncoated glass. To compare the mechanical properties of the samples, the ratio HV/KIC (where KIC is the toughness) has been calculated and the concept of fragility discussed. The fragility of coated samples increases as the ZrO2 content diminishes and the SiO2 increases. Both scanning and transmission electron microscopy observations were performed to characterise the textural and microstructural properties of the coatings.
Versión del editorhttp//dx.doi.org/10.1016/S0025-5408(03)00187-9
URIhttp://hdl.handle.net/10261/153262
DOI10.1016/S0025-5408(03)00187-9
ISSN0025-5408
Aparece en las colecciones: (IETCC) Artículos
Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
Materials Research Bulletin, 38, 2003, 1635–1644.pdfArtículo principal687,42 kBAdobe PDFVista previa
Visualizar/Abrir
Mostrar el registro completo
 

Artículos relacionados:


NOTA: Los ítems de Digital.CSIC están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.