English   español  
Por favor, use este identificador para citar o enlazar a este item: http://hdl.handle.net/10261/151743
COMPARTIR / IMPACTO:
Estadísticas
logo share SHARE logo core CORE   Add this article to your Mendeley library MendeleyBASE

Visualizar otros formatos: MARC | Dublin Core | RDF | ORE | MODS | METS | DIDL
Exportar a otros formatos:
Título

Thermal analysis of metal organic precursors for functional oxide preparation: Thin films versus powders

AutorRoura, Pere; Farjas, Jordi; Eloussifi, H.; Carreras, Laura; Ricart, Susagna ; Puig Molina, Teresa ; Obradors, Xavier
Palabras clavePyrolysis
Thermal decomposition
YBCO
Fecha de publicación10-feb-2015
EditorElsevier
CitaciónThermochimica Acta 601: 1-8 (2015)
ResumenThe thermal decomposition of several metal organic precursors, used in the preparation of YBa2Cu3O7 x superconducting coated conductors (Cu acetate, Cu, Y and Ba trifluoroacetates and Ce propionate) is analyzed by means of several thermoanalytical techniques (TG/DTA, MS and DSC). In all cases, the metal organic precursors deposited as thin films decompose differently than powders from the same precursors. In thin films, decomposition is facilitated by the easier transport of reactive gas from the surrounding atmosphere and by the easier out-diffusion of volatile products. Consequently, films decompose at lower temperature and are more sensitive to the presence of any residual reactive gas in the furnace. Good thermal contact with the substrate is also shown to minimize overheating in films and avoid combustion processes that are otherwise often observed during the thermal decomposition of powders. Finally, the formation and stability of intermediate products towards the oxide formation, such as metal fluorides, differs in films because of the easier gas exchange. With respect to powders, these compounds are much less stable in films, where their decomposition temperature can be lowered by several hundreds of degrees Celsius. While in some cases the behaviour of films can be predicted by analyzing varying masses of precursor powders, this is not always the case. Therefore, thermal analysis carried out on films is recommended to avoid erroneous conclusions about materials preparation drawn from powders.
Versión del editorhttp://dx.doi.org/10.1016/j.tca.2014.12.016
URIhttp://hdl.handle.net/10261/151743
DOI10.1016/j.tca.2014.12.016
ISSN1872-762X
Aparece en las colecciones: (ICMAB) Artículos
Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
Roura_ThermAct_2015_postprint.pdf257,79 kBAdobe PDFVista previa
Visualizar/Abrir
Mostrar el registro completo
 

Artículos relacionados:


NOTA: Los ítems de Digital.CSIC están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.