English   español  
Por favor, use este identificador para citar o enlazar a este item: http://hdl.handle.net/10261/150453
COMPARTIR / IMPACTO:
Estadísticas
logo share SHARE logo core CORE   Add this article to your Mendeley library MendeleyBASE

Visualizar otros formatos: MARC | Dublin Core | RDF | ORE | MODS | METS | DIDL
Exportar a otros formatos:
Título

A modified multiple tension upward infiltration method to estimate the soil hydraulic properties

AutorMoret-Fernández, David ; Latorre Garcés, Borja ; Peña-Sancho, Carolina; Ghezzehei, T. A.
Palabras claveDisc infiltrometer
Hydraulic conductivity
Water Retention Curve
HYDRUS
Fecha de publicaciónago-2016
EditorJohn Wiley & Sons
CitaciónMoret-Fernández D, Latorre B, Peña-Sancho C. A modified multiple tension upward infiltration method to estimate the soil hydraulic properties. Hydrologica Processes 30 (17): 2991–3003 (2016)
ResumenDetermination of saturated hydraulic conductivity, Ks, and the shape parameters α and n of the water retention curve, θ(h), is of paramount importance to characterize the water flow in the vadose zone. This work presents a modified upward infiltration method to estimate Ks, α and n from numerical inverse analysis of the measured cumulative upward infiltration (CUI) at multiple constant tension lower boundary conditions. Using the HYDRUS-2D software, a theoretical analysis on a synthetic loam soil under different soil tensions (0, 0–10, 0–50 and 0–100 cm), with and without an overpressure step of 10 cm high from the top boundary condition at the end of the upward infiltration process, was performed to check the uniqueness and the accuracy of the solutions. Using a tension sorptivimeter device, the method was validated in a laboratory experiment on five different soils: a coarse and a fine sand, and a 1-mm sieved loam, clay loam and silt-gypseous soils. The estimated α and n parameters were compared to the corresponding values measured with the TDR-pressure cell method. The theoretical analysis demonstrates that Ks and θ(h) can be simultaneously estimated from measured upward cumulative infiltration when high (>50 cm) soil tensions are initially applied at the lower boundary. Alternatively, satisfactory results can be also obtained when medium tensions (<50 cm) and the Ks calculated from the overpressure step at the end of the experiment are considered. A consistent relationship was found between the α (R2 = 0.86, p < 0.02) and n (R2 = 0.97, p < 0.001) values measured with the TDR-pressure cell and the corresponding values estimated with the tension sorptivimeter. The error between the α (in logarithm scale) and n values estimated with the inverse analysis and the corresponding values measured with pressure chamber were 3.1 and 6.1%, respectively.
Descripción38 pags.- 3 Tabls.- 11 Figs. The definitive version is available at: http://onlinelibrary.wiley.com/journal/10.1002/(ISSN)1099-1085
Versión del editorhttp://dx.doi.org/10.1002/hyp.10827
URIhttp://hdl.handle.net/10261/150453
DOI10.1002/hyp.10827
ISSN0885-6087
E-ISSN1099-1085
Aparece en las colecciones: (EEAD) Artículos
Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
MoretD_HydrolProcess_2016.pdf1,91 MBAdobe PDFVista previa
Visualizar/Abrir
Mostrar el registro completo
 

Artículos relacionados:


NOTA: Los ítems de Digital.CSIC están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.