English   español  
Por favor, use este identificador para citar o enlazar a este item: http://hdl.handle.net/10261/147741
Título

Mechanisms for photon sorting based on slit-groove arrays

AutorVillate-Guío, F.; Martín-Moreno, Luis; León-Pérez, F. de
Palabras clavePhoton sensing
Photon sorting
Plasmonics
Nanostructured metals
Fecha de publicación2015
EditorElsevier
CitaciónPhotonics and Nanostructures - Fundamentals and Applications 13: 58-65 (2015)
ResumenMechanisms for one-dimensional photon sorting are theoretically studied in the framework of a coupled-mode method. The considered system is a nanopatterned structure composed of two different pixels drilled on the surface of a thin gold layer. Each pixel consists of a slit-groove array designed to squeeze a large fraction of the incident light into the central slit. The Double-Pixel is optimized to resolve two different frequencies in the near infrared. This system shows high transmission efficiencies and a small crosstalk. It is found that the response of the system strongly depends on the effective area shared by overlapping pixels. According to such degree of overlap, photon sorting can be achieved within three different regimes, which are discussed in detail. Optimal photon-sorting efficiencies are obtained for a moderate number of grooves that overlap with grooves of the neighbor pixel. These results could be applied to both optical and infrared detectors.
Versión del editorhttps://doi.org/10.1016/j.photonics.2014.10.003
URIhttp://hdl.handle.net/10261/147741
DOI10.1016/j.photonics.2014.10.003
Identificadoresdoi: 10.1016/j.photonics.2014.10.003
issn: 1569-4410
Aparece en las colecciones: (ICMA) Artículos
Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
slit-groove.pdf1,33 MBAdobe PDFVista previa
Visualizar/Abrir
Mostrar el registro completo
 

Artículos relacionados:


NOTA: Los ítems de Digital.CSIC están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.