English   español  
Por favor, use este identificador para citar o enlazar a este item: http://hdl.handle.net/10261/147639
COMPARTIR / IMPACTO:
Estadísticas
logo share SHARE logo core CORE   Add this article to your Mendeley library MendeleyBASE

Visualizar otros formatos: MARC | Dublin Core | RDF | ORE | MODS | METS | DIDL
Exportar a otros formatos:
Título

Effect of secondary annealing process on critical current density in highly textured Bi-2212 superconducting system

AutorAksan, M. A.; Madre, M. A.; Rasekh, Sh.; Constantinescu, G.; Torres, M. A.; Diez, J. C.; Sotelo, A.; Yakinci, M. E.
Fecha de publicación2015
EditorSpringer
CitaciónJOM 67(9): 2079-2086 (2015)
ResumenBi-2212 samples prepared by a solid-state reaction technique have been grown from the melt using the laser floating zone method. After annealing the as-grown bars, the samples showed a good grain alignment and a high transport critical current density. Secondary annealing processes were performed on the annealed samples with the aim of producing Bi-2212 phase controlled decomposition. Hence, the Bi-2201 phase and the secondary phases, which act as effective pinning centers, were obtained with the secondary annealing process. After these thermal treatments, the transport critical current densities of samples significantly increased, when compared to the annealed ones. The maximum critical current density was achieved when the samples were subjected to secondary annealing at 680°C for 168 h with an improvement of ~80%, compared to the annealed ones. Moreover, it was found that magnetization of the secondarily annealed samples was also increased. The magnetic critical current densities in these secondary annealed samples were about 3 times higher than the values obtained for the annealed ones. These results clearly indicate that the secondary annealing processes lead to the formation of effective pinning centers in the bulk material.
Versión del editorhttps://doi.org/10.1007/s11837-015-1509-2
URIhttp://hdl.handle.net/10261/147639
DOI10.1007/s11837-015-1509-2
Identificadoresdoi: 10.1007/s11837-015-1509-2
issn: 1543-1851
Aparece en las colecciones: (ICMA) Artículos
Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
147639ANNEALING.pdf1,02 MBAdobe PDFVista previa
Visualizar/Abrir
Mostrar el registro completo
 


NOTA: Los ítems de Digital.CSIC están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.