English   español  
Por favor, use este identificador para citar o enlazar a este item: http://hdl.handle.net/10261/134154
Título

Effect of microstructure on mechanical properties of porcelain stoneware

AutorMartín-Márquez, Jorge; Rincón López, Jesús María; Romero, Maximina
Palabras claveMullite
Porcelain stoneware
Mechanical properties
Traditional ceramics
Microstructure-final
Fecha de publicaciónnov-2010
EditorElsevier
CitaciónJournal of the European Ceramic Society Volume 30: 3063–3069 (2010)
ResumenThis work examines the effect of microstructure (aspect ratio of mullite crystals and proportion of crystalline and amorphous phases) as well as different physical features (bulk density, closed and open porosity and absolute density) on the mechanical properties of a standard porcelain stoneware composition (50% kaolinitic clay, 40% feldspar and 10% quartz) fired in the 1200–1300 °C temperature interval using a fast firing schedule. The mechanical behaviour was evaluated in terms of bending strength, Vickers microhardness, fracture toughness and Young's modulus. After viewing the results, it can be concluded that increased σf, Hv and E values were mainly due to open porosity, percentage of mullite phase and morphology of secondary mullite needles, whereas closed porosity and quartz particles have no influence on these properties.
Versión del editorhttp//dx.doi.org/10.1016/j.jeurceramsoc.2010.07.015
URIhttp://hdl.handle.net/10261/134154
DOI10.1016/j.jeurceramsoc.2010.07.015
ISSN0955-2219
Aparece en las colecciones: (IETCC) Artículos
Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
Journal of the European Ceramic Society, 30, 2010, 3063–3069.pdfArtículo principal1,2 MBAdobe PDFVista previa
Visualizar/Abrir
Mostrar el registro completo
 

Artículos relacionados:


NOTA: Los ítems de Digital.CSIC están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.