English   español  
Please use this identifier to cite or link to this item: http://hdl.handle.net/10261/130456
Share/Impact:
Statistics
logo share SHARE logo core CORE   Add this article to your Mendeley library MendeleyBASE

Visualizar otros formatos: MARC | Dublin Core | RDF | ORE | MODS | METS | DIDL
Exportar a otros formatos:
Title

Correlation of the holes quality with the force signals in a microdrilling process of a sintered tungsten-copper alloy

AuthorsBeruvides, Gerardo ; Quiza, Ramón; Toro Matamoros, Raúl Mario del ; Castaño, Fernando ; Haber Guerra, Rodolfo E.
KeywordsMicrodrilling
Wavelet package analysis
Signal feature extraction
Modeling
Holes quality errors
Issue Date2014
PublisherSpringer
CitationSpringer Tracts in Advanced Robotics 15: 1801- 1808 (2014)
AbstractHoles quality errors are an undesired but unavoidable consequence in drilling operations. Due to the small dimensions involved in the microdrilling processes, quality measurement and control must be carried out offline, by using microscopy or other high precision measurement devices. This paper presents a study about the correlation between the holes quality and the force signals in the microdilling process of 0.1 mm and 0.5 mm-diameter holes in a sintered tungsten-copper alloy. The surface of the obtained holes was scanned by means of an interferometry microscope and the error of the holes was computed from the scanned data. The three components of the forces were measured during all the drilling process. The behavior of these signals, in three different intervals (tool entrance, forward motion and backward motion) was described by wavelet package analysis. The features having higher correlation with the holes quality error were the average power of the axial component of the forces in the frequency bands of 0~391 Hz and 3906~4297 Hz, during the backward motion. With these features, a statistical regression model was fitted. The main outcomes of this study are the basement for obtaining reliable models for monitoring systems in microdrilling operations.
Publisher version (URL)http://dx.doi.org/10.1007/s12541-014-0532-5
URIhttp://hdl.handle.net/10261/130456
DOI10.1007/s12541-014-0532-5
ISSN1610-7438
Appears in Collections:(CAR) Artículos
Files in This Item:
File Description SizeFormat 
accesoRestringido.pdf15,38 kBAdobe PDFThumbnail
View/Open
Show full item record
Review this work
 

Related articles:


WARNING: Items in Digital.CSIC are protected by copyright, with all rights reserved, unless otherwise indicated.