English   español  
Please use this identifier to cite or link to this item: http://hdl.handle.net/10261/129689
Share/Impact:
Statistics
logo share SHARE logo core CORE   Add this article to your Mendeley library MendeleyBASE

Visualizar otros formatos: MARC | Dublin Core | RDF | ORE | MODS | METS | DIDL
Exportar a otros formatos:
DC FieldValueLanguage
dc.contributor.authorRuiz-Andres, M.-
dc.contributor.authorConde, A.-
dc.contributor.authorDamborenea, Juan de-
dc.contributor.authorGarcía, Ignacio-
dc.date.accessioned2016-03-03T11:12:25Z-
dc.date.available2016-03-03T11:12:25Z-
dc.date.issued2015-
dc.identifierdoi: 10.1590/1516-1439.000314-
dc.identifierissn: 1516-1439-
dc.identifier.citationMaterials Research 18(4): 843-852 (2015)-
dc.identifier.urihttp://hdl.handle.net/10261/129689-
dc.description.abstractIn this work correlation between the 1000 MPa dual phase (DP) steel microstructure and the strain gained after roll-forming process have been studied by both microstructural and micromechanical analysis. The scanning electron microscope (SEM) inspection in the bent area reveals changes in the ferrite-martensitic microstructure. The plastic deformation of DP steels originates defects at the edges of bent sheet make them partly responsible for the damage caused. In addition, electron backscatter diffraction (EBSD) measurements have been carried out for an in-depth characterization after roll-forming. A high density of misorientation of the crystal lattice within the ferrite strained grains is observed, mainly concentrated in the ferrite/martensite grain boundaries. Furthermore, the ultramicrohardness tests exhibit little dependence between mechanical parameters and the material properties.-
dc.description.sponsorshipThe authors gratefully acknowledge the funding by Ministerio de Economía y Competitividad under project Innpacto IPT-020000-2010-020 and project CONSOLIDER-INGENIO 2010 CSD 2008-0023 FUNCOAT.-
dc.publisherUniversidade Federal de São Carlos-
dc.rightsclosedAccess-
dc.subjectRoll-forming-
dc.subjectUltramicrohardness-
dc.subjectMicrostructure-
dc.subjectEBSD-
dc.subjectDual phase steel-
dc.titleMicrostructural and micromechanical effects of cold roll-forming on high strength dual phase steels-
dc.typeartículo-
dc.identifier.doi10.1590/1516-1439.000314-
dc.date.updated2016-03-03T11:12:25Z-
dc.description.versionPeer Reviewed-
dc.language.rfc3066eng-
dc.contributor.funderMinisterio de Economía y Competitividad (España)-
dc.relation.csic-
dc.identifier.funderhttp://dx.doi.org/10.13039/501100003329es_ES
Appears in Collections:(CENIM) Artículos
Files in This Item:
File Description SizeFormat 
accesoRestringido.pdf15,38 kBAdobe PDFThumbnail
View/Open
Show simple item record
 

Related articles:


WARNING: Items in Digital.CSIC are protected by copyright, with all rights reserved, unless otherwise indicated.