English   español  
Por favor, use este identificador para citar o enlazar a este item: http://hdl.handle.net/10261/129341
logo share SHARE logo core CORE   Add this article to your Mendeley library MendeleyBASE

Visualizar otros formatos: MARC | Dublin Core | RDF | ORE | MODS | METS | DIDL
Exportar a otros formatos:

Wear Behavior of Aluminum Alloys at Slow Sliding Speeds

AutorRuiz-Andres, M.; Conde, A. ; Damborenea, Juan de ; García, Ignacio
Palabras claveUnlubricated Wear
Wear Mechanisms
Fecha de publicación2015
EditorTaylor & Francis
CitaciónTribology Transactions 58(5): 955-962 (2015)
Resumen© 2015, Copyright © Society of Tribologists and Lubrication Engineers. The investigated slow sliding speeds presented in this work enable the understanding of the wear behavior on aluminum alloys and could possibly facilitate the completion of the previously proposed wear mechanism map for aluminum at this slow sliding speed range. Dry sliding block-on-ring wear tests were carried out on aluminum alloys, AA5754 (Al-Mg), AA6082 (Al-Mg-Si), and AA7075 (Al-Zn-Cu), at a very slow sliding speed range (<0.01 m/s). A bearing steel ring of AISI 52100 was used as the counterbody. Tests were performed at varying contact pressures, 20, 100, and 140 MPa, and sliding speeds ranging from 0.001 to 1.5 m/s. The wear tracks and debris collected were examined by scanning electron microscopy (SEM), energy-dispersive spectroscopy (EDS), and X-ray diffraction (XRD), with the aim of analyzing their morphology and composition. At relatively slow sliding speeds (>0.01 m/s), the specimens exhibited a wear process placed at the mild wear regime, characterized by oxidation and delamination mechanisms of both the aluminum specimen and the steel ring. However, at very slow speed range (<0.01 m/s), an increase in the wear rate and the friction coefficient is observed for all of the aluminum alloys, thus suggesting that an alternative wear mechanism could be taking place.
Versión del editorhttp://dx.doi.org/10.1080/10402004.2015.1027432
Identificadoresdoi: 10.1080/10402004.2015.1027432
issn: 1547-397X
Aparece en las colecciones: (CENIM) Artículos
Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
accesoRestringido.pdf15,38 kBAdobe PDFVista previa
Mostrar el registro completo

NOTA: Los ítems de Digital.CSIC están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.