English   español  
Por favor, use este identificador para citar o enlazar a este item: http://hdl.handle.net/10261/122799
Compartir / Impacto:
Estadísticas
Add this article to your Mendeley library MendeleyBASE
Visualizar otros formatos: MARC | Dublin Core | RDF | ORE | MODS | METS | DIDL
Título

Influence of sliding direction changes, contact frequency and Bauschinger effect on the wear of dual phase steels

AutorRuiz-Andres, M.; Conde, A. ; Damborenea, Juan de ; García, Ignacio
Fecha de publicación2015
EditorElsevier
CitaciónTribology International 92: 485-492 (2015)
Resumen© 2015 Elsevier Ltd. All rights reserved. Friction and wear rate behaviour of dual phase steel discs (DP600) have been studied as a function of sliding speed (0.5-1.25 m/s) and contact frequency (3.5-8.5 Hz) under unidirectional and bidirectional (reversal motion) ball-on-disc dry sliding wear tests. The wear rate is found to be higher under unidirectional sliding. The Bauschinger effect - BE-appears to take place during the bidirectional sliding processes. However, it is only evident when the sliding direction is reversed for some limited times, where the mass loss decreases accompanied a weakened strain-hardening effect. Moreover, the BE in the DP600 steel discs is also affected by both the sliding speed and the contact frequency, but its effect is clearly different.
Versión del editorhttp://dx.doi.org/10.1016/j.triboint.2015.07.033
URIhttp://hdl.handle.net/10261/122799
DOI10.1016/j.triboint.2015.07.033
Identificadoresdoi: 10.1016/j.triboint.2015.07.033
issn: 0301-679X
Aparece en las colecciones: (CENIM) Artículos
Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
accesoRestringido.pdf15,38 kBAdobe PDFVista previa
Visualizar/Abrir
Mostrar el registro completo
 

Artículos relacionados:


NOTA: Los ítems de Digital.CSIC están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.