English   español  
Por favor, use este identificador para citar o enlazar a este item: http://hdl.handle.net/10261/117945
Compartir / Impacto:
Estadísticas
Add this article to your Mendeley library MendeleyBASE
Visualizar otros formatos: MARC | Dublin Core | RDF | ORE | MODS | METS | DIDL
Título

Determination of Valanis model parameters in a bolted lap joint: Experimental and numerical analyses of frictional dissipation

AutorAbad, Javier Óscar; Medel, F. J.; Franco, Jaime M.
Palabras claveEquivalent stiffness
Dissipated energy
Valanis parameters
Bolt preload
Bolted lap joint
Fecha de publicación2014
EditorElsevier
CitaciónInternational Journal of Mechanical Sciences 89: 289-298 (2014)
ResumenIn this work, Valanis model parameters, and their variation with bolt preload, were determined for a bolted lap joint, which consisted in two steel plates held together by a metric 12 screw. For this purpose, a series of transitory non-linear analyses were performed on the basis of a three dimensional finite element model of the bolted lap joint subjected to varying bolt preloads and tangential displacements. Curve fitting of hysteresis cycles obtained from numerical simulations allowed determination of Valanis model parameters as well as assessment of bolt preload influence on these parameters. In addition, the present numerical simulations provided information about the evolution of the contact state from stick to slip regimes between the bolted plates, reflecting the non-linear behaviour of the joint. Quasi-static tests at several preloads and tangential displacements conditions were conducted to validate Valanis model parameters previously obtained from numerical simulations. The present findings provided detailed information about the evolution of the aforementioned Valanis parameters with bolt preload. Thus, we confirmed that equivalent stiffness values corresponding to the macro-slip regime as well as the upper limit of the sticking regime (Et and σ0, respectively) are highly influenced by bolt preload levels. These results may prove useful to appropriately design bolted joints to be used under specific stiffness and damping criteria, and therefore reducing the vibration response of the joint.
Versión del editorhttp://dx.doi.org/10.1016/j.ijmecsci.2014.09.014
URIhttp://hdl.handle.net/10261/117945
DOI10.1016/j.ijmecsci.2014.09.014
Identificadoresdoi: 10.1016/j.ijmecsci.2014.09.014
issn: 0020-7403
Aparece en las colecciones: (ICMA) Artículos
Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
DETERMINATION OF VALANIS.pdf478,1 kBAdobe PDFVista previa
Visualizar/Abrir
Mostrar el registro completo
 

Artículos relacionados:


NOTA: Los ítems de Digital.CSIC están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.